687263
48
Zoom out
Zoom in
Previous page
1/60
Next page
9.16 Switching the Dynamic Power Display Off
As standard, the inverter signals its power dynamically via the pulsing of the green LED. When
doing so, the LED flashes on and off uniformly or is permanently lit at full power. The various
gradations are related here to the set active power limit of the inverter. If this display is not desired,
switch this function off in accordance with the following procedure. Once this has been done, the
green LED is only lit permanently to signalize feed-in operation.
The basic procedure for changing operating parameters is explained in another section (see
Section9.14 "Changing Operating Parameters", page46).
Procedure:
In the parameter group Device > Operation, select the parameter Dynamic power
display via green LED and set this to Off.
9.17 Switching WLAN Off
The inverter is equipped with an activated WLAN interface as standard. If you do not want to use
WLAN, you can switch the WLAN function off in accordance with the following procedure. In
doing so, you can switch the WLAN direct connection and the WLAN connection in the local
network on or off independently of each other. If you would like to switch the WLAN function off
completely, you must switch off both the WLAN direct connection and the WLAN connection in the
local network.
The basic procedure for changing operating parameters is explained in another section (see
Section9.14 "Changing Operating Parameters", page46).
Switching on the WLAN function only possible via Ethernet connection
If you switch off both the WLAN function for the WLAN direct connection and for the WLAN
connection in the local network, access to the inverter user interface and therefore reactivation
of the WLAN interface is only possible via an Ethernet connection.
Procedure:
To switch off the WLAN direct connection, select the parameter Soft-access-point is turned
on and set this to No.
To switch off the WLAN connection in the local network, select the parameter WLAN is
turned on and set this to No.
9.18 Switching WLAN On
If you have switched the WLAN function for direct connection or for connection in the local network
off, you can switch the WLAN function back on in accordance with the following procedure. In
doing so, you can switch the WLAN direct connection and the WLAN connection in the local
network on independently of each other.
The basic procedure for changing operating parameters is explained in another section (see
Section9.14 "Changing Operating Parameters", page46).
Requirement:
If the WLAN function was previously switched off completely, the inverter must be connected
to a computer or router via Ethernet.
9 Configuration
SMA Solar Technology AG
Operating ManualSB15-25-BE-en-1048
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 1.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 1.5 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 1.5

SMA Sunny Boy 1.5 User Manual - German - 98 pages

SMA Sunny Boy 1.5 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info