687263
46
Zoom out
Zoom in
Previous page
1/60
Next page
Removing a detected energy meter from the PV system
If only one energy meter is detected by the inverter, this will be added to the PV system
automatically. Removal via the menu System Configuration is not possible in this case. To
remove the energy meter from the PV system, proceed as follows:
In the parameter group PV system communication > Measured values > Meter on
Speedwire set the parameter Serial Number to any number (e.g. 1) (see Section9.14
"Changing Operating Parameters", page46). In this way, instead of the energy meter
detected, the PV system will add a fictitious energy meter to which the inverter can not
establish communication.
Procedure:
1. Call up the inverter user interface (see Section8.1, page34).
2. Log in as Installer.
3. On the right-hand side of the menu bar, select the menu User Settings (see Section8.2
"Design of the Inverter User Interface", page37).
4. In the subsequent context menu, select [Start the installation assistant].
5. Select [Save and next] until you arrive in the menu Meter configuration.
6. Add or replace the desired energy meter.
9.13 Configuring Feed-In Management
If required by the grid operator, the inverter can provide grid management services. You can
configure these via the inverter feed-in management. Coordinate the configuration of the feed-in
management with your grid operator beforehand.
Procedure:
1. Call up the inverter user interface (see Section8.1, page34).
2. Log in as Installer.
3. On the right-hand side of the menu bar, select the menu User Settings (see Section8.2
"Design of the Inverter User Interface", page37).
4. In the subsequent context menu, select [Start the installation assistant].
5. Select [Save and next] until you arrive in the menu Feed-in management.
6. Configure the feed-in management as desired.
9.14 Changing Operating Parameters
The operating parameters of the inverter are set to certain values by default. You can change the
operating parameters to optimize the performance of the inverter.
9 Configuration
SMA Solar Technology AG
Operating ManualSB15-25-BE-en-1046
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 1.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 1.5 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 1.5

SMA Sunny Boy 1.5 User Manual - German - 98 pages

SMA Sunny Boy 1.5 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info