490939
8
Zoom out
Zoom in
Previous page
1/17
Next page
Different ways of connecting the combined microphone input
If you want to use the XLR input unbalanced, connect the centre pin to the ground
1 = Ground
2 = + ( Live)
3 = - ( Return )
FUNCTIONS
Front Panel
1. POWER On/Off switch
2. INPUT SELECTOR (4x) Selects the input signal for both channels
3. TREBLE (4x) Treble control for both channels
4. BASS (4x) Bass control for both channels
5. CHANNEL (4x) Slider controls for the volume of both channels
6. MICROPHONE 6.3mm/XLR combi jack for a microphone
7. MIC LEVEL Setting of the microphone output level
8. TALKOVER Switch that attenuates the sound of every channel when the
mic is used
9. VU-METER Displays the strength of the output signal
10. MASTER Master control for the volume of the output signal
11. ASSIGN Channel selection knob for the crossfader function
12. CROSSFADER Fast fading between the channels
13. CUE SELECT Selects the channel to be heard through the headphones
14. PFL LEVEL Sets the volume to the microphone output
15. HEADPHONE 6.3mm Jack socket for the headphones
Rear Panel
16. EARTH Earth connector for the ground wire from the turntables
17. REC RCA sockets for connection to a recorder
18. MASTER RCA sockets to the amplifier
19/21 CHANNEL PHONO & LINE RCA sockets for connection to a PHONO or LINE (CD player,
tuner, etc.) for the different channels
20. MIC 6.3mm Jack connector for the microphone
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec TEC 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec TEC 350 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info