678440
17
Zoom out
Zoom in
Previous page
1/24
Next page
Basic setting 15
Traffic station set-ups
Call up the TIM Setup recording time Setup by pressing the range selector
key and the function key .
Press on the left of the display on TIM recording time, in order to open
the Time setting Setup.
–In the Time setting Setup, briefly press on the arrow keys or on
the display, below the display of the hours or minutes, in order to
gradually change the respective time unit down or up.
Keep pressing the corresponding arrow key, in order to continuously
change the time unit. Release the button if the desired value has been
reached.
Press on the function key in order to take over the indicated TIM
recording time and to exit the Setup Time setting.
In this way you can set both desired TIM recording times.
Activate or deactivate the desired TIM recording time by pressing the
function key . If the check-box is active
the accompanying
TIM recording time is activated.
The unit starts with the recording 90 minutes before the set start time and ends the
recording 30 minutes afterwards.
Setup Media
Call up the Setup Media Setup by pressing the range selector key
and the function key .
Function keys in the Setup - Setup Media
- for playback of an external audio source.
- enables a wireless transfer of MP3 data from the Phone
preinstallation.
- according to the set-ups the title and performer
name or only the data and folder name will be displayed for audio CDs with CD
texts and in the MP3 operation.
- plays all MP3 data one after the other
according to the sequence on the played medium, which are stored in the folders
and sub-folders.
- the input sensitivity of the AUX-IN input for adjusting the play
function volume of a connected external audio source can be adapted to other
audio sources in three steps. Press on the function key and select
the desired input sensitivity in the opening pop-up window. If a MDI input is addi-
tionally installed, this setting also applies for the audio sources which are
connected to this input.
System set-ups
Call up the Setup System Setup by pressing the range selector key
and the function key .
Change the system language manually
Press on the function key and select the desired
language in the opening pop-up window. The system language is
normally preset to the set language in the instrument cluster
Automatic”. If desired, another language can be selected for the
radio as described.
Resetting the factory settings on the unit
Press on the function key .
Confirm the following safety interrogation, the unit will be reset in the
as-delivered condition and all the stored data will be erased.
Rear lighting of the control buttons
Press on the function key .
SETUP Traffic information
Active
SETUP
Media
Activate AUX input
Activate Bluetooth audio
Deactivate performers/Title names
Scan/Mix/Repeat including sub-folder
AUX Input level
AUX Input level
SETUP
System
System language
Factory settings
ILLUMINATION
s3p4.a.book Page 15 Friday, March 13, 2009 3:04 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda BOLERO - 2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda BOLERO - 2010 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda BOLERO - 2010

Skoda BOLERO - 2010 User Manual - German - 26 pages

Skoda BOLERO - 2010 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info