Manual Skoda BOLERO - 2010 (page 22 of 24) (English)

678440

Zoom out

Zoom in

1/24

Basic setting20

Incoming phone call

– An incoming phone call will be indicated on the display by “Incoming

call” followed by the call number of the caller. If the number of the

caller is stored in the phone book, the name of the caller will be

displayed instead of the call number.

– Press the function key to accept the call.

– Press the function key to reject the call.

During a phone conversation

– If you press the function key during a phone conversation the

current conversation will be switched to “mute” (Display: “Call is

held”). This means that the connection remains intact while the audio

transmission is interrupted.

– If you press the function key , again the conversation can be

continued.

– If you press the function key , during a phone conversation, the

connection to the current call number will be terminated and the unit

will change to the main Setup PHONE.

Carrying out an additional phone conversation

– Press on the function key during a phone conversation to put the

current conversation on “hold” as described above.

– Select a new call number or select a stored call number.

– If you are holding an additional conversation, you can switch between

both parties (“alternate”).

“Call waiting” and changing between two parties (Alternate)

– If you are called while holding a conversation, the number and the

name of the caller will appear below the current conversation on the

display (Function: “Call waiting”).

– Press on the function key in the line “Incoming call” to reject the

second call.

– Press on the function key in the line “Incoming call” to accept the

second call. The connection to the first party will be interrupted but

not broken (Display: “Call is held”).

– If you press the function key in the line “call is held”, the conver-

sation with this party will continue and the other party will be “put on

hold”. In this way you can alternate between two parties.

– Press the function key , to break the connection to the call number

displayed in this line.

DTMF key tones

A particular DTMF key tone is assigned to each each key of a phone. DTMF key tones

are used, for example, for the input of a password via the phone or for choosing a

colleague in a “Call center”.

If a DTMF key tone has to be entered during a conversation, you can open the

keypad field by pressing the function key at the bottom left and follow the instruc-

tions (for example: “For a private conversation with one of our co-workers, please

press ”).

You can store a longer DTMF key tone on your mobile phone. If, during a conversa-

tion, this DTMF key tone has to be entered, call up the corresponding entry from the

phone book as described.

If you press in the input mask on the function key , the displayed character

sequence in the entry line will be played as DTMF key tone sequence.

Please note that in a DTMF key tone sequence the character “+” must not appear,

as it interrupts the playing of a DTMF key tone.

Only valid for the universal Phone preinstallation GSM III.

















DTMF

s3p4.a.book Page 20 Friday, March 13, 2009 3:04 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skoda BOLERO - 2010 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda BOLERO - 2010

Skoda BOLERO - 2010 User Manual - German - 26 pages

Skoda BOLERO - 2010 User Manual - Dutch - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skoda BOLERO - 2010 Manual

Product: