701673
12
Zoom out
Zoom in
Previous page
1/168
Next page
12
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! 
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
b
Meuleuse d’angle 9001/9006/9016
INTRODUCTION
Cet outil sert au meulage, au tronçonnage et à
l’ébarbage léger de pièces en métal et en pierre sans
utiliser de l’eau
Cet outil n’est pas conçu pour un usage professionnel
Ne jamais appliquez une trop forte pression sur
l’outil; laissez au disque le soin de faire le travail de
par sa propre vitesse
Les opérations de coupe avec disques à tronçonner
abrasifs ne sont autorisées que si une protection
de tronçonnage (disponible en option comme
accessoire SKIL 2610Z01133/2610Z01134) est
utilisée
Lisez et conservez ce manuel d’instruction
2
CARACTERISTIQUES TECHNIQUES
1
ELEMENTS DE L’OUTIL
2
A Arbre
B Bride de serrage
C Clé
D Bouton de blocage de l’arbre
E Poignée auxiliaire
F Protège-main
G Vis du protège-main
H Clé hexagonale
J Bride de montage
K Interrupteur marche/arrêt de verrouillage
L Fentes de ventilation
SECURITE
AVERTISSEMENTS DE SECURITE GENERAUX POUR
L’OUTIL ELECTRIQUE
- AVERTISSEMENT Lisez tous les avertissements
de sécurité, les instructions, les illustrations et les
 Ne pas
suivre les instructions énumérées ci-dessous peut provoquer
un choc électrique, un incendie et/ou une blessure sérieuse.
Conservez tous les avertissements et toutes les
instructions pour pouvoir s’y reporter ultérieurement.
Le terme “outil électrique” dans les avertissements se
- do not apply pressure on the tool; let the speed of the
cutting disc do the work
- the working speed of the cutting disc depends on the
material to be cut
- do not brake cutting discs with side pressure
Holding and guiding the tool
- always hold the tool rmly with both hands, so you will
have full control of the tool at all times
! 
coloured grip area(s)
e
- provide for a secure stance
- pay attention to the direction of rotation; always hold the
tool so, that sparks and grinding/cutting dust y away
from the body
- keep ventilation slots L
6
uncovered
APPLICATION ADVICE
Instead of ange B
6
the “CLIC” quick-clamping ange
(SKIL accessory 2610388766) can be used; grinding/
cutting discs can then be mounted without the use of
accessory keys
For more tips see www.skil.com
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always keep tool and cord clean (especially ventilation
slots L
6
)
! do not attempt to clean ventilation slots by
inserting pointed objects through openings
! disconnect the plug before cleaning
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol
5
will remind you of this when the need for
disposing occurs
NOISE / VIBRATION
Measured in accordance with EN 60745 the sound
pressure level of this tool is 92 dB(A) and the sound
power level 103 dB(A) (standard deviation: 3 dB), and the
vibration when surface grinding 10.5 m/s² (triax vector
sum; uncertainty K = 1.5 m/s²)
! 

The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 9006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 9006 in the language / languages: All languages as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info