758639
9
Zoom out
Zoom in
Previous page
1/92
Next page
9

Wet & Dry Vacuum cleaner 8700
INTRODUCTION
This appliance is intended for the collection and
vacuuming of non-ammable liquids as well as
dry materials
This appliance is intended for indoor use only and
suitable for industrial usage as required in hotels,
schools, hospitals, factories, shops, oces and
rental businesses
This appliance is not suitable for vacuuming
hazardous dusts
Read this instruction manual carefully before use and
save it for future reference 2
Pay special attention to the safety instructions and
warnings; failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury
Check whether the packaging contains all parts as
illustrated in drawing 3
When parts are missing or damaged, please contact
your dealer
TECHNICAL SPECIFICATIONS 1
APPLIANCE ELEMENTS 3
A Locking latch (2)
B Motor head
C Container
D Caster (4)
E Cartridge lter
F Vacuum hose
G Hose connection
H Extension tube (2)
J Airow control handle
K Floor brush nozzle
L Round brush nozzle
M Crevice nozzle
N On/o switch
P Universal power tool adapter
Q Airow regulator
R Cartridge lter protection
S Dust bag
T Foam sleeve lter
U Cable clip
V Ventilation slots
W Filter retainer
X HEPA Filter door
Z HEPA Filter
SAFETY
ELECTRICAL SAFETY
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the appliance
(appliances with a rating of 230V or 240V can also be
connected to a 220V supply)
Connect this earthed appliance only to a properly earthed
power supply system; ensure that socket and extension
cable have a functional protective conductor
When operating the appliance in damp environments,
use a residual current device (RCD) with a triggering
current of 30 mA maximum
Always disconnect plug from power source during work
breaks, when not in use or when working on the
appliance (e.g. changing/cleaning lters), in order to
prevent accidental starting
Switch o the appliance before disconnecting the plug
Do not use the appliance when the power supply cable,
plug or switch is damaged
If the power supply cable is damaged while working, do
not touch it, but immediately disconnect the plug
Do not drive over, crush or stretch the power supply cable
Do not pull the power supply cable to disconnect the plug
or to move the appliance
A damaged power cord shall be replaced at a SKIL
service centre only in order to avoid a hazard
PERSONAL SAFETY
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety
Ensure that children do not play with the appliance
Never vacuum materials that contain asbestos
(asbestos is considered carcinogenic)
Do not vacuum inflammable or explosive fluids
(such as gasoline, oil, alcohol, solvents)
Do not vacuum explosive dusts (such as coal dust,
magnesium dust, grain dust)
Do not vacuum toxic materials
Never vacuum hot ashes or pointed/sharp objects
Do not operate the appliance in rooms where the
danger of an explosion exists
Provide for good ventilation at the working place
If foam or liquid escapes from the appliance, switch
off immediately
Never operate the appliance without the necessary lters
as described in this manual
Do not leave the appliance unattended when plugged in
Use extra care when cleaning on stairs
Regularly check the proper condition of the vacuum hose
(when doing so leave the vacuum hose mounted to
prevent dust from coming out)
Keep the ventilation slots uncovered during vacuuming
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
USE
Assembly 3 4
! ensure that the plug is disconnected from the
power source before assembling the appliance
- unlock latches A and lift motor head B o container C
- remove contents from container and turn it
upside down
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 8700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 8700 in the language / languages: All languages as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info