758357
16
Zoom out
Zoom in
Previous page
1/52
Next page
16.
Rip or straight line cutting (Fig. 20)
1Raise the blade guard foot (1) by loosening the height
adjustment knob (2).
2.Measure from the tip of the blade to the desired dis-
tance. Position the straight edge parallel to the blade
atthat distance.
3. Clamp the straight edge to the table.
4. Recheck your measurements using the workpiece to
be cut and make sure the straight edge is secure.
5. Position the workpiece against the blade and place
the blade guard foot against the top surface of the
workpiece.
6. Secure the blade guard foot in place by tightening the-
height adjustment knob.
7. Remove the workpiece from the blade prior to turning
the scroll saw ON.
In order to avoid uncontrollable lifting
of the workpiece and reduce blade
breakage, do not turn the switch on while the work-
piece is against the blade.
8. Position the workpiece against the straight edge prior
to touching the leading edge of the workpiece against
the blade.
9. Slowly feed the workpiece into the blade, guiding the
workpiece against the straight edge and pressing the
workpiece down against the table.
Do not force the leading edge of the
workpiece into the blade. The blade
will deflect, reducing accuracy of cut, and may
break.
10. When the cut is complete, move the trailing edge of
the workpiece beyond the blade guard foot. Turn the
switch OFF.
11. Maximum rip cut that can be performed on this saw
is 16 inch.
Basic Scroll Saw Operations
1
FIG. 20
2
Quantity Description
2 Small C-clamps
1 Ruler or measuring tape
112" straight scrap of wood
(thickness to match workpiece)
Tools needed
CAUTION
!
CAUTION
!
SM 2610957121 05-08 6/5/08 7:35 AM Page 16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 3335-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 3335-01 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info