519345
6
Zoom out
Zoom in
Previous page
1/124
Next page
6
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
c) When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR CORDLESS SCISSORS
GENERAL
Do not use tool/charger when damaged; take it to one of
the ocially registered SKIL Service Stations for a safety
check
Do not leave the tool unattended
This tool is not a toy; keep it out of reach of children
This tool should not be used by people under the age of
16 years
Do not clamp the tool in a vice
Do not expose tool/charger/battery to rain
Do not carry or suspend the charger by the cord
Never pull the charger cord to disconnect the charger
from the power source
Keep the charger cord away from heat, oil and sharp
edges
ACCESSORIES
SKIL can assure awless functioning of the tool only
when original accessories are used
BEFORE USE
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the charger
(chargers with a rating of 230V or 240V can also be
connected to a 220V supply)
Check the functioning of the tool before each use and, in
case of a defect, have it repaired immediately by a
qualied person; never open the tool yourself
DURING USE
• Keephandsawayfrommovingcuttingblades
Keep hands away from cutting area; never reach
underneath the material for any reason while cutting
Ensure that no material or surface under the cutting area
can be damaged by the cutting blades
Hold tool by insulated gripping surface when performing
an operation where the cutting blades may contact
hidden wiring; contact with a “live” wire will make exposed
metal parts of the tool “live” and shock the operator
In case of electrical or mechanical malfunction,
immediately switch o the tool or unplug charger from
power source
AFTER USE
Remove battery from tool before making any adjustments
or changing accessories
Store tool/charger in locations where temperature will not
exceed 40°C or drop below 0°C
CHARGING/BATTERIES
Charge battery only with the charger that is supplied with
the tool
Never charge battery outdoors 4
Do not charge battery in damp or wet environments
Do not use charger when cord or plug is damaged; cord
or plug should be replaced immediately at one of the
ocially registered SKIL Service Stations
Do not use battery when damaged; it should be replaced
immediately
Do not disassemble charger or battery
Batteries may explode when disposed of in re, so do not
burn battery for any reason
EXPLANATION OF SYMBOLS ON CHARGER/BATTERY
3 Read the instruction manual before use
4 Only use the charger indoors
5 Double insulation (no earth wire required)
6 Fail-safe isolating transformer (the power source is
electrically separated from the transformer output)
7 Automatic shut-o when charger gets too hot (thermic
fuse blows and charger becomes useless)
8 Incorrect polarity of the charger connection could cause
a hazard (only charge the battery with the charger
supplied)
9 Do not dispose of the charger together with household
waste material
0 Do not dispose of the battery together with household
waste material
! NiMH technology provides more energy in a less
environment-polluting way
USE
On/o @
- switch on the tool by pushing switch A forward
- lock the switch for continuous use by pushing switch A
further forward until it snap-locks
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 2900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 2900 in the language / languages: All languages as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skil 2900

Skil 2900 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info