479914
7
Zoom out
Zoom in
Previous page
1/128
Next page
7
! only use bits with hexagon shaft
When turning in a screw at/near the
cross cut end or an edge of wood,
pre-drill a hole in order to avoid
cracking of the wood
For an optimal use of the tool a steady
pressure on the screw is required,
especially while removing
When screwdriving in hard wood one
should pre-drill a hole
For more tips see
www.skileurope.com
• Vibration level
The vibration emission level stated at
the back of this instruction manual has
been measured in accordance with a
standardised test given in EN 60745; it
may be used to compare one tool with
another and as a preliminary
assessment of exposure to vibration
when using the tool for the
applications mentioned
- using the tool for different
applications, or with different or
poorly maintainted accessories, may
signifi cantly increase the exposure
level
- the times when the tool is switched
off or when it is running but not
actually doing the job, may
signifi cantly reduce the exposure
level
! protect yourself against the
effects of vibration by maintaining
the tool and its accessories,
keeping your hands warm, and
organizing your work patterns
MAINTENANCE / SERVICE
Keep tool and charger clean
- clean charging contacts in charger
with alcohol or contact cleaner
! unplug charger from power
source before cleaning
If the tool/charger should fail despite
the care taken in manufacturing and
testing procedures, repair should be
carried out by an after-sales service
centre for SKIL power tools
- send the tool or charger
undismantled together with proof of
purchase to your dealer or the
nearest SKIL service station
(addresses as well as the service
diagram of the tool are listed on
www.skileurope.com)
ENVIRONMENT
Do not dispose of electric tools,
batteries, accessories and
packaging together with household
waste material (only for EU countries)
- in observance of European Directive
2002/96/EC on waste of electric and
electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned to
an environmentally compatible
recycling facility
- symbol @ will remind you of this
when the need for disposing occurs
! remove the batteries before
disposal of the tool #
F
Tournevis sans fil 2148
INTRODUCTION
Cet outil avec rotation à droite/gauche
est conçu pour le vissage au bois
Lisez et conservez ce manuel
d’instructions 3
SPECIFICATIONS TECHNIQUES 1
Couple max. vissage dur suivant
ISO 5393: 7 Nm
ELEMENTS DE L’OUTIL 2
A Interrupteur pour mise en marche/arrêt
B Commutateur pour inverser le sens de
rotation
C Porte-embout
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 2148 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 2148 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info