758615
8
Zoom out
Zoom in
Previous page
1/108
Next page
8
Keep the measuring tool clean at all
times
Do not immerse the measuring tool in
water or other uids
Wipe o debris using a moist and
soft cloth
Do not use any cleaning agents or
solvents
Regularly clean the surfaces at the exit
opening of the laser in particular, and
pay attention to any u of bres
If the tool should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried
out by an after-sales service centre for
SKIL power tools
-send the tool undismantled
together with proof of purchase to
your dealer or the nearest SKIL
service station (addresses as well
as the service diagram of the tool
are listed on www.skil.com)
Be aware that damage due to overload
or improper handling of the tool will
be excluded from the warranty (for
the SKIL warranty conditions see
www.skil.com or ask your dealer)
ENVIRONMENT
Do not dispose of electric
tools, batteries, accessories
and packaging together with
household waste material (only for
EU countries)
-in observance of European Directive
2012/19/EC on waste of electric
and electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned
to an environmentally compatible
recycling facility
-symbol 4 will remind you of this
when the need for disposing occurs
b
Mesure du laser 1928/1929
INTRODUCTION
Cet outil permet de mesurer des
distances tant à l'intérieur qu'à
-when there is only 1 measurement,
the display will show only dashes
-when pressing main button
H again you will return to the
measuring mode, showing the last 2
measurements in the display
APPLICATION ADVICE
Faulty measurements cannot be
excluded when measuring to dierent
surfaces; the problematic surfaces are:
-transparent surfaces (e.g., glass,
water)
-reective surfaces (e.g., polished
metal, glass)
-porous surface (e.g., insulation
materials)
-structured surfaces (e.g., roughcast,
natural stone)
If required, use piece of paper or a
laser target plate (not included) on
these surfaces
Other possible causes for faulty
measurement:
-the measurement took place outside
the measuring range
-the angle between laser beam and
target was too small
-the reception lens B or the laser
beam opening A was misted up (e.g.
due to a rapid temperature change)
Air layers with varying temperatures
or indirectly received reections can
aect the measured value
MAINTENANCE / SERVICE
This tool is not intended for
professional use
Protect the measuring tool against
moisture and direct sun light
Do not subject the measuring
tool to extreme temperatures or
variations in temperature (the
accuracy of the measuring tool can
be impaired)
-as an example, do not leave it in
vehicles for long time
-allow the measuring tool to adjust
to the ambient temperature before
putting it into operation
Avoid heavy impact to or falling down
of the measuring tool
-damage to the measuring tool can
impair its accuracy
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 1929 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1929 in the language / languages: All languages as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info