758615
7
Zoom out
Zoom in
Previous page
1/108
Next page
7
-with the laser beam activated, aim
the laser at the target
-this mode can be used to move the
tool relative to the target and the
continuously updated distance is
displayed
-when the display shows only
dashes, the measurement cannot
be made (see APPLICATION
ADVICE for possible causes) 9
-press the main button H to stop the
measurement and save the current
value q
! keep in mind that the tool
measures from its rear (the
tool length is included in the
measuring result)
-press main button H to activate
laser and start a consecutive
measurement; press main
button H again to stop and
save the measurement (up to 2
measurements can be displayed)
Wheel measuring mode (1929) w
-press the side button to enter wheel
measuring mode (see blinking
wheel indicator)
-use wheel to measure (see rotating
wheel indicator)
-the wheel can be used forwards and
backwards
-when changing direction during
measurement, the measured value
will be deducted and even be
negative if you cross the starting
point again
! try to hold the tool in a
consistent angle and keep a
steady pressure to get to most
accurate measurement
-press side button G quickly twice to
restart the measurement e
-press main button H to stop the
measurement (see wheel indicator)
and save the measurement
-press main button H to start a
consecutive measurement; press
main button H again to stop and
save the measurement (up to 2
measurements can be displayed)
-press side button G again to return
to laser measurement mode
Area measurement r
-press main button H quickly twice
to calculate and show the area from
the last 2 measurements
be created in the measuring tool which
may ignite the dust or fumes)
EXPLANATION OF SYMBOLS ON
TOOL
2 Read the instruction manual before
use
3 Do not dispose of electric tools and
batteries together with household
waste material
4 Laser radiation / Do not stare into
beam / Class 2 laser product
USE
Inserting/replacing the batteries 5
-alkali-manganese batteries are
recommended for the measuring
tool
-do not use rechargeable batteries
-to open the battery lid D, press on
the latch E and fold the battery lid up
-insert 2 x AAA batteries (pay
attention to correct polarisation)
-always replace all batteries at the
same time
-only use batteries from one brand
and with the identical capacity
-close battery lid D
-remove the batteries from the
measuring tool when not using
it for extended periods (when
storing for extended periods,
the batteries can corrode and
self-discharge)
Battery level indicator 6
-during use the battery level indicator
on the display indicates the
remaining battery capacity
On/o
-press side button G to turn on the
tool
-press and hold side button G for 1
second to turn o the tool
Change units 8
-press and hold main button H for 1
second to change the measurement
unit (feet, feet/inch, or meter)
Laser measuring mode
-when you turn on the tool, it will
enter laser measuring mode with the
laser turned o (see indicator) 7a
-press main button H to turn on the
laser (see blinking laser indicator)
7b
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 1929 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1929 in the language / languages: All languages as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info