758616
9
Zoom out
Zoom in
Previous page
1/132
Next page
9
national law, electric tools that have
reached the end of their life must be
collected separately and returned
to an environmentally compatible
recycling facility
-symbol 3 will remind you of this
when the need for disposing occurs
b
Laser croix 1910/1911/1912
INTRODUCTION
L’outil de mesure est conçu pour
déterminer et vérier des lignes
horizontales et verticales
L’outil de mesure est exclusivement
conçu pour fonctionner dans des
locaux fermés
Cet outil n’est pas conçu pour un
usage professionnel
Conservez ces instructions dans
un lieu sûr et remettez-les à tout
nouvel utilisateur de l’appareil de
mesure
CARACTERISTIQUES
TECHNIQUES
Distance
d'utilisation
(approximative)*
15m (1910),
20m (1911/1912)
Précision de
nivellement ±0,5 mm/m
Plage de niveau
automatique
± 4°
Durée de mise à
niveau ≤5 secondes
Température de
fonctionnement -5°C à +40°C
Température de
stockage -20°C à +70°C
Humidité relative
(max.)
90 %
Classe laser 2
Type de laser 635 nm (1910),
520 nm (1911/1912)
Raccord de trépied 1/4”
-allow the measuring tool to adjust
to the ambient temperature before
putting it into operation
Avoid heavy impact to or falling
down of the measuring tool
-damage to the measuring tool can
impair its accuracy
-after heavy impact or shock,
compare the laser lines with
a known horizontal or vertical
reference line
Push switch F 1 into locking
position 6 when transporting
the measuring tool (this locks the
levelling unit, which can be damaged
in case of intense movement)
Keep the measuring tool clean at all
times
Do not immerse the measuring tool in
water or other uids
Wipe o debris using a moist and
soft cloth
Do not use any cleaning agents or
solvents
Regularly clean the surfaces at the exit
opening of the laser in particular, and
pay attention to any u of bres
If the tool should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried
out by an after-sales service centre for
SKIL power tools
-send the tool undismantled
together with proof of purchase to
your dealer or the nearest SKIL
service station (addresses as well
as the service diagram of the tool
are listed on www.skil.com)
Be aware that damage due to overload
or improper handling of the tool will
be excluded from the warranty (for
the SKIL warranty conditions see
www.skil.com or ask your dealer)
ENVIRONMENT
Do not dispose of electric
tools, batteries, accessories
and packaging together with
household waste material (only for
EU countries)
-in observance of European Directive
2012/19/EC on waste of electric
and electronic equipment and its
implementation in accordance with
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 1910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1910 in the language / languages: All languages as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info