758616
7
Zoom out
Zoom in
Previous page
1/132
Next page
7
B indicates the remaining battery
capacity with dierent colors
-GREEN indicates more than 40% of
full capacity
-YELLOW indicates less than 40% of
full capacity
-RED indicates only 30 minutes left
before turning o automatically
On/o 6
-to switch on the measuring tool,
press either laser button C when
using it WITHOUT automatic
leveling, or slide switch F into
position 6a to unlock the levelling
unit when using it WITH automatic
levelling
! immediately after switching on,
the measuring tool sends a laser
beam out of the exit opening D
! do not point the laser beam
at persons or animals and do
not stare into the laser beam
yourself, not even from a large
distance
-to switch o the measuring tool,
press either laser button C when
using it WITHOUT automatic
leveling, or slide switch F into
position 6b to lock the levelling
unit when using it WITH automatic
levelling
-do not leave the switched on
measuring tool unattended and

after use (other persons could be
blinded by the laser beam)
-when not using the measuring tool,
switch it o in order to extend the
battery life
Working with automatic levelling
-position the measuring tool on a
level, rm support or attach it to
tripod N or to the clamp holder G
-slide switch F to position 6a
-if the automatic levelling function
is not possible, e.g. because the
surface on which the measuring tool
stands deviates by more than 4°
from the horizontal plane, the laser
lines ash and indicator E turns red
-if this is the case, set up the
measuring tool in a level position
and wait for the self-levelling to
take place
-as soon as the measuring tool is
once again within the self-levelling
without supervision (they could
unintentionally blind other persons or
themselves)
Do not operate the measuring tool
in explosive environments, such

liquids, gases or dusts (sparks can
be created in the measuring tool which
may ignite the dust or fumes)
EXPLANATION OF SYMBOLS ON
TOOL
2 Read the instruction manual before
use
3 Do not dispose of electric tools and
batteries together with household
waste material
4 Laser radiation / Do not stare into
beam / Class 2 laser product
USE
Charging battery 5
! the battery supplied is partially
charged (to ensure full capacity
of the battery, completely charge
the battery in the battery charger
before using your power tool for

! read and follow the instruction
delivered with the charger or
power supply
-only use a charger or power supply
which has an output voltage of 5V
and output current of ≥0.5A
-connect charger cable P with
both charger or power supply (not
standard included) and charger
interface A
-indicator B is blinking RED
indicating that the battery is being
charged and the current battery
capacity enables the tool to be
operated for 30 minutes or less
-indicator B is blinking YELLOW
indicating that the battery is being
charged and the current battery
capacity enables the tool to be
operated for more than 30 minutes
-indicator B is blinking GREEN
indicating that the battery is charged
for more than 90% of full capacity
-indicator B turns GREEN
continuously when the battery is
fully charged
Battery level indicator B 1
-during use the battery level indicator
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 1910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1910 in the language / languages: All languages as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info