699801
8
Zoom out
Zoom in
Previous page
1/204
Next page
8

Lawn mower/trimmer 0711/0712
INTRODUCTION
This tool is intended for domestic lawn mowing only
This tool is not intended for professional use
Check whether the packaging contains all parts as
illustrated in drawing 2
When parts are missing or damaged, please contact your
dealer
• Readthisinstructionmanualcarefullybeforeuse
andsaveitforfuturereference4
TECHNICAL DATA 1
TOOL ELEMENTS 3
A Bolt for mounting guide handle
B Adjustable guide handle
C Cord restraint
D Cord clip
E Grass box
F Safety switch
G Trigger switch
H Ventilation slots
J Rear guard
k Cutting blade
SAFETY
GENERAL
Be familiar with the controls and the proper use of the tool
Never allow children, persons with reduced physical,
sensory or mental capabilities, or lack of experience and
knowledge, or people who are not familiar with the
operating instructions to use the tool (local regulations
can restrict the age of the operator)
Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
pets are nearby
Ensure that children do not play with the tool
The user is responsible for accidents or hazards
occurring to other people or their property
Use only accessories and replacement parts
recommended by SKIL
Always disconnect plug from power source during work
breaks or before cleaning, maintenance, making
adjustments and changing accessories, in order to
reduce the risk of starting the tool accidentally
ELECTRICAL SAFETY
Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
Only use an extension cord of types H05VV-F or
H05RN-F which is intended for outdoor use and
equipped with a watertight plug and coupling-socket
Only use extension cords with a maximum length of 40
metres (1,0 mm²), 60 metres (1,5 mm²) or 100 metres
(2,5 mm²)
When operating the tool use a residual current device
(RCD) with a triggering current of 30 mA maximum
Do not run over, crush or pull the (extension) cord
Protect the (extension) cord from heat, oil and sharp
edges
Do not connect a damaged cord to the power source or
touch a damaged cord before it is disconnected from the
power source (damaged cords can lead to contact with
live parts)
BEFORE USE
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
Inspect the cord periodically and have it replaced by a
qualied person, if damaged
Inspect the extension cord periodically and replace it, if
damaged (inadequateextensioncordscanbe
dangerous)
Never use the tool when cord is damaged; have it
replaced by a qualied person
Never operate the tool with a defective rear guard or
defective grass box
Regularly check for defects such as loose, dislodged or
damaged blade, loose xings, and worn or damaged
components
Have worn or damaged components replaced in sets to
preserve balance
• Neverreplacetheplasticbladeswithmetallicblades
Do not operate the tool when barefoot or wearing open
sandals; always wear sturdy shoes and long trousers
Avoid wearing loose-tting clothing that is loose-tting,
hanging cords or ties
Thoroughly inspect the area where the mower is to be
used and remove all hard objects which could be caught
up and thrown by the cutting mechanism
DURING USE
• Keepthe(extension)cordawayfromtherotating
cuttingblade
Avoid using the tool in bad weather conditions, especially
when there is a risk of lightning
Only mow with sucient daylight or with appropriate
articial lighting
Keep hands and feet away from the cutting blade,
especially when switching on the tool
Always ensure that the ventilation openings are kept clear
of debris
Avoid operating the mower on wet lawns
Keep proper balance and footing at all times; do not
overreach
Keep proper footing on slopes and do not mow extremely
steep slopes
Operate the mower at a walking pace only (do not run)
Mow across the face of slopes (never up and down)
Be extremely careful when changing direction on slopes
Be extremely careful when moving backwards or pulling
the mower towards you
Ensure that the cutting blade is at a complete standstill
when tilting the tool for crossing surfaces other than
grass and when transporting it to and from the area to be
mowed
Do not tilt the tool when starting or switching on the
motor, except if the tool has to be tilted for starting in long
grass (in this case, do not tilt it more than absolutely
necessary and tilt only the part which is away from the
operator); always ensure that both hands are in the
operating position before returning the tool to the ground
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0711 in the language / languages: All languages as an attachment in your email.

The manual is 20,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info