758619
8
Zoom out
Zoom in
Previous page
1/124
Next page
8
- slide switch F to position 5 (indicator E lights up green)
- if the automatic levelling function is not possible, e.g. because the surface on
which the measuring tool stands deviates by more than 4° from the horizontal
plane, the laser lines ash and indicator E lights up red
- if this is the case, set up the measuring tool in a level position and wait for the
self-levelling to take place
- as soon as the measuring tool is once again within the self-levelling range of
±4°, the laser lines light up continuously and indicator E lights up green
- when not within the self-levelling range of ±4°, working with automatic levelling
is not possible, because it cannot be assured that the laser lines run at a right
angle to each other
- in case of ground vibrations or position changes during operation, the
measuring tool is automatically levelled in again
- to avoid errors, check the position of the horizontal and vertical laser line with
regard to the reference points upon re-levelling
Working without automatic levelling
- slide switch F in position 6 (indicator E lights up red)
- when automatic levelling is switched o, you can hold the measuring tool freely
in your hand or place it on an inclined surface
- the laser lines no longer necessarily run vertical to each other
Attaching with the holder
- with holder G you can fasten the measuring tool to dierent objects ranging in
thickness between 10 and 60 mm, such as vertical or horizontal boards or pipes
- loosen fastening screw H, mount the holder to the desired location and tighten
the fastening screw again
- place the measuring tool via tripod mount J onto the 1/4” male thread K of the
holder and screw it on applying moderate force
! do not overtighten the measuring tool, otherwise it can become
damaged
- adjust the holder roughly before switching on the measuring tool; for this, loosen
locking screw L, move the measuring tool until horizontally positioned at the
desired height and retighten the locking screw
APPLICATION ADVICE
Always use the centre of the laser line for marking (the width of the laser line
changes with the distance)
Laser viewing glasses 1 (not standard included)
- laser viewing glasses M 1 lter out the ambient light
- this makes the red light of the laser appear brighter for the eyes
- do not use the laser viewing glasses as safety goggles (the laser viewing
glasses are used for improved visualisation of the laser beam, but they do not
protect against laser radiation)
- do not use the laser viewing glasses as sun glasses or in traffic (the laser
viewing glasses do not aord complete UV protection and reduce colour
perception)
Working with the tripod (not standard included)
- tripod N 1 oers a stable, height-adjustable measuring support
- place the measuring tool via tripod mount J onto the 1/4” male thread of the
tripod and screw the locking screw of the tripod tight
MAINTENANCE / SERVICE
This tool is not intended for professional use
Protect the measuring tool against moisture and direct sun light
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0511 in the language / languages: All languages as an attachment in your email.

The manual is 5,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info