758619
7
Zoom out
Zoom in
Previous page
1/124
Next page
7
Do not direct the laser beam at persons or animals and do not stare into the
direct or reflected laser beam yourself, not even from a distance (you could
blind somebody, cause accidents or damage your eyes) 3
If laser radiation strikes your eye, you must deliberately close your eyes
and immediately turn your head away from the beam
Do not make any modifications to the laser equipment
Have the measuring tool repaired only through qualified specialists using
original spare parts (this ensures that the safety of the measuring tool is
maintained)
Do not allow children to use the laser measuring tool without supervision
(they could unintentionally blind other persons or themselves)
Do not operate the measuring tool in explosive environments, such as in
the presence of flammable liquids, gases or dusts (sparks can be created in
the measuring tool which may ignite the dust or fumes)
EXPLANATION OF SYMBOLS ON TOOL
2 Read the instruction manual before use
3 Laser radiation / Do not stare into beam / Class 2 laser product
4 Do not dispose of electric tools and batteries together with household waste
material
USE
Inserting/replacing the batteries
- alkali-manganese batteries are recommended for the measuring tool
- do not use rechargeable batteries
- to open the battery lid A, press on the latch B and fold the battery lid up
- insert 2 x AA/LR06 batteries (pay attention to correct polarisation)
- always replace all batteries at the same time
- only use batteries from one brand and with the identical capacity
- remove the batteries from the measuring tool when not using it for
extended periods (when storing for extended periods, the batteries can
corrode and self-discharge)
On/o
- to switch on the measuring tool, press on/o button C (immediately after
switching on, the measuring tool sends a laser beam out of exit opening D)
! do not point the laser beam at persons or animals and do not stare into
the laser beam yourself, not even from a large distance
- to switch o the measuring tool, press on/o button C repeatedly until indicator
E goes out
- slide switch F into position 6 to lock the levelling unit
- do not leave the switched on measuring tool unattended and switch the
measuring tool off after use (other persons could be blinded by the laser
beam)
- when not using the measuring tool, switch it o in order to extend the battery life
Operating modes
- all modes can be selected WITH automatic levelling (position 5) and WITHOUT
automatic levelling (position 6)
- press button C repeatedly until the desired mode is set
1) Cross-line mode: the measuring tool generates a horizontal and a vertical
laser line 7 8
2) Horizontal mode: the measuring tool generates a horizontal laser line 9
3) Vertical mode: the measuring tool generates a vertical laser line 0
Working with automatic levelling
- position the measuring tool on a level, rm support or attach it to tripod N or to
the supplied holder
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0511 in the language / languages: All languages as an attachment in your email.

The manual is 5,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info