Restore Factory
Defaults
Click Defaults button to reloads all default settings on the
camera.
Restart Camera Click Restart button to restarts the camera.
Toolbox - Status
System
Device Name
This shows the name of the Network Camera.
Description This shows the description of the Network Camera, such as location.
F/W version The version of the current firmware installed.
Network
MAC Address The current IP address of the Network Camera.
IP Address The IP Address of the Network Camera.
Network
Mask
The network mask associated with the IP address above.
Gateway The IP Address of the remote Gateway associated with the IP Address
above.
Wireless
WSC PIN
Dode
It displays the current WSC PIN code.
Network
Type
This shows the Network Type currently in use (Ad-hoc or
Infrastructure).
SSID This displays the wireless SSID.
Channel This shows the wireless channel currently used.
Security The current security setting for Wireless connections.
Signal
Strength
This shows the strength of the signal.
MPEG-4/MJPEG
Resolution The image size of the video stream.
Video
Quality
This displays the image quality of the video stream.