489083
10
Zoom out
Zoom in
Previous page
1/72
Next page
WL-108 Wireless Network Modem/router 11M
10
Rear Panel
Power port 10/100BaseT
LAN connections
Reset Button WAN port
(10/100BaseT)
Connect the supplied
power adapter here.
Use standard LAN
cables (RJ45
connectors) to
connect your PCs to
these ports.
Note:
Any LAN port on the
WL-108/109 will
automatically
function as an
"Uplink" port when
required. Just
connect any port to
a normal port on the
other hub, using a
standard LAN cable.
This button has two
(2) functions:
Reboot. When
pressed and
released, the WL-
108/109 will reboot
(restart).
Diagnostic print-
out. If held down
for 3 seconds, a
diagnostic print-out
will be sent to the
attached printer.
Ensure the printer is
ready before doing
this.
Clear All Data.
This button can also
be used to clear ALL
data and restore ALL
settings to the
factory default
values.
To Clear All Data
and restore the
factory default
values:
Power Off.
Hold the Reset
Button down while
you Power On.
Keep holding the
Reset Button for a
few seconds, until
the RED Status LED
on the front panel
has flashed TWICE.
Release the Reset
Button. The WL-
108/109 is now
using the factory
default values.
Connect this port to
your ADSL line.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-108 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info