489083
8
Zoom out
Zoom in
Previous page
1/72
Next page
WL-108 Wireless Network Modem/router 11M
8
Setting up the Modem/router
Physical installation
1. Ensure the Wireless ADSL Router is powered OFF.
Installation - WL-108
2. Connect the LAN cables: For the WL-108, use standard LAN cables to
connect the PCs to the LAN ports (hub) on the broadband
modem/router. If necessary connect the "Uplink" port to a standard
port on another hub. You must use a standard LAN cable for this.
Note: If you use the "Uplink" port, then port 4 CANNOT be used.
3. Connect the supplied ADSL cable from the WAN port on the Wireless
ADSL Router (the RJ11 connector) to the ADSL terminator provided by
your phone company.
4. Your wireless PC’s need some configuration which is explained later on
in this manual.
5. Connect the power supply adapter to the broadband modem/router.
Use only the adapter supplied with the router.
6. Check the LEDs
The Power LED should be ON.
The Status LED should flash, then turn Off. If it stays on, there is a
hardware error.
For each LAN (PC) connection, the LAN Link/Act LED should be ON
(provided the PC is also ON.)
The WAN LED should be ON.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-108 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info