430488
16
Zoom out
Zoom in
Previous page
1/81
Next page
DC-202 xDSL/Cable Broadband router
16
Manual configuration – Internet access
1. Make TCP/IP settings on your PC, as described in the foregoing sec-
tion.
Do not forget to restart your PC after you have finished.
2. Using UPnP
If your Windows system supports UPnP, an icon for the DC-202 will ap-
pear in the system tray, notifying you that a new network device has
been found, and offering to create a new desktop shortcut to the
newly-discovered device.
Unless you intend to change the IP Address of the DC-202, you can
accept the desktop shortcut.
Whether you accept the desktop shortcut or not, you can always
find UPnP devices in My Network Places.
Double click the icon for the DC-202 (either on the Desktop, or in
My Network Places) to start the configuration. Proceed with step 4.
3. Start your web browser. In the Address field, enter the following:
192.168.0.1
If you can't connect
If the DC-202 does not respond, check the following:
The DC-202 is properly installed, LAN connection is OK, and it
is powered ON. You can test the connection by using the
"Ping" command:
Open the MS-DOS window or command prompt window.
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not work-
ing, or your PC's IP address is not compatible with the DC-
202's IP Address. (See next item.)
If your PC is using a fixed IP Address, its IP Address must be
within the range 192.168.0.2 to 192.168.0.254 to be compati-
ble with the DC-202's default IP Address of 192.168.0.1. Also,
the Network Mask must be set to 255.255.255.0. See Chapter
4 - PC Configuration for details on checking your PC's TCP/IP
settings.
Ensure that your PC and the DC-202 are on the same network
segment. (If you don't have a router, this must be the case.)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom broadband xdsl cable router w 4p switch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom broadband xdsl cable router w 4p switch in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info