616322
7
Zoom out
Zoom in
Previous page
1/14
Next page
INSERTING / CHANGING NEEDLES
Needles must be in perfect condition.
Problems can occur with: A. Bent needles B. Damaged points C. Blunt needles
PRESSER FOOT LIFTER
The Presser Foot Lifter is located inside the “C” area of the machine. Use this to raise and
lower the presser foot.
Raise the Presser Foot Lifter before beginning to thread the machine, to ensure that the
machine is properly threaded. Raise it also to remove work from the machine when sewing
is finished. Lower the Presser Foot Lifter after setting fabric under the presser foot,
to begin sewing.
NEEDLE / FABRIC / THREAD GUIDE
There are various styles of needles available for your machine, depending on the type of
fabric you are sewing. Be sure to use the correct style and size of needle to achieve the
best results for your sewing projects.
The most common needle styles are regular point and ball point. The most commonly
used sizes are: 11/80, 14/90 and 16/100. The smaller the number is, the smaller the
needle size is. The larger the number is, the larger the needle is. Use smaller size
needles for lighter weight fabrics and larger size needle for heavier weight fabrics. The
chart below offers some suggestions for matching thread type and needle type with
various fabrics, for best results.
Regular point needles are designed for use with fabrics that are woven, such as cotton,
linen, silk, denim or twill. The style number for this needle is 2020.
Ball point needles are designed for use with fabrics that are stretch knit, such as spandex,
t-shirt knit or tricot. The style number for this needle is 2045.
Fabric Thread
Needle Style
Needle Size
Lightweight: taffeta,
organdy, batiste
Medium weight: linen,
challis, chintz, cotton
Medium heavy: tweed,
denim, corduroy
Knit: stretch woven,
spandex, tricot
All purpose thread;
Silk thread
All purpose thread;
Silk thread
All purpose thread;
Heavy duty cotton
All purpose thread;
Silk thread
2020
2020
2020
2045
11
14
14 or 16
14
Change the needle regularly, especially if it is showing signs or wear or causing problems.
For best sewing results, always use SINGER brand needles.
To insert a new needle, first turn the Power On/Off & Speed Control Switch to the “off” position.
Loosen the needle clamp screw.
Remove the old needle and discard it.
Insert the new needle, with the flat side toward the back, as far up as it will go.
Tighten the needle clamp screw securely.
®
12
11
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer Vivo -1004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer Vivo -1004 in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info