76
“Time required for embroidering” and “remaining time”
are shown on LCD screen.
* If you have selected Slow or Medium Speed, when you use
an optional embroidery card , the embroidery time required for
embroidering indicated in the Instructions for the embroidery
card will not agree with the time and remaining time shown on
the LCD screen.
The time required for embroidering indicated in Instructions for
the embroidery card is calculated for maximum speed.
How to Change Embroidering Speed
Thread Sewing Machine.Lower embroidery foot. Start machine.
Raise embroidery
presser foot. Install
embroidery frame with
stabilized fabric.
10 11 12 13
To use embroidery card (optional)
The embroidery sewing
speed can be set with the
Speed controller to Slow,
Medium or Maximum
Speed. Being able to slow
the sewing speed is useful
when joining complex
Multiple Hoop Patterns or
using a special embroidery
thread that is prone to
breakage.
*Refer to pages 63 and
64 for description of
automatic threading of
sewing machine.
9
Holding embroidery card with
its notch positioned in the
lower left, insert it into card
slot until it will go no further.
Inserting Sew-Ware Embroidery Card
Be sure to close cover. If
cover is left opened,
embroidery card will be
disabled.
See page 77 for how to move pattern to different embroidering location inside embroidery frame.
See page 78 for how to rotate or change size of patterns or letters.
See pages 79 and 80 for how to change orientation of letters stored in memory from horizontal to vertical
or change interval between letters.
See pages 81 and 82 for how to combine patterns and letters.
See pages 83 to 90 for how to continuously sew letters using the Multiple Hoop Function
See pages 91 and 92 for how to layout and sew a Combination Patterns and Letters Multiple Hoop Design
See pages 97 and 98 for how to store letters and patterns in memory.
Hold embroidery card with its
notch positioned lower left.
At this point before sewing the Pattern or Combination of Patterns, the Screen Layout can be edited.
