Zigzag stitch
For overcasting
To sew curved part, select
zigzag stitch pattern (small) or
(medium) to produce narrrow
width and short length stitches.
Adjust position of fabric so that
needle enters slightly outside
applique parts.
Zigzag width/stitch length of zigzag stitch patterns
31
Position fabric under presser
foot so that needle enters
just fabric edge.
For applique
Select a stitch pattern to be sewn and press pictogram.
Place fabric at sewing starting position and start machine.
Sewing machine sews three
back tack stitches first, and
continuously sews the
material in normal direction.
When predetermined seam
end is reached, press reverse
stitch button. Then, machine
will back tack three stitches,
stop at predetermined position
and trim both needle thread
and bobbin thread.
Automatic back tacking
Stitch length
Zigzag width
(example)
Manual adjustment range
5
0.2 ~ 4.0
0.2 ~ 4.0
0.2 ~ 4.0
23
* Be sure to stop machine with reverse stitch button. If you stop
machine without pressing reverse stitch button and
re-start sewing from a different sewing position, machine will
start sewing of previous stitch pattern without performing back
tacking (unless you select a different stitch pattern).
Zigzag width,
automatic
Automatic stitch length:
Manual stitch length: Set a new length by changing stitch
length shown on LCD screen.
To increase stitch length,
press pictogram.
To decrease stitch length,
press pictogram.
Automatic zigzag width:
Manual zigzag width: Set a new width by changing zigzag
width shown on LCD screen.
To change zigzag width,
press or pictograms.
1.5
1.5
1.5
Automatic
Stitch pattern to
be selected
Presser foot to
be selected
Standard presser
foot (A)
___
* Adjustable range of zigzag width is 0 to 7 mm.
Zigzag width
Stitch length
