459430
18
Zoom out
Zoom in
Previous page
1/64
Next page
16
1. Raise the needle to its highest position by rotating the
hand wheel toward you (counter-clockwise).
2. Open the bobbin access cover by pulling it down.
With your ngers, pull open the bobbin case latch as
shown, and take out the bobbin case from the shuttle.
3. Release the latch, and bobbin will drop out of the case.
1. Hold the bobbin in your right hand with the thread
running clockwise.
2. Insert the bobbin into the case with about 4” (10 cm)
of thread showing outside the case.
3. Pull the thread through the slit in the case and then
underneath the at tension spring. It will click when it
is in place.
4.
Keep about 4” (10 cm) of thread showing outside the
case.
REMOVING BOBBIN CASE FROM
SHUTTLE
1. Positionner l’aiguille en ça position la plus haut en tournant le volant vers vous. (sens
antihoraire).
2. Ouvrer la porte qui donne accès à la canette en la tirant vers le bas. Avec vos doigts,
tirer sur le loquet, tel que l'illustration, pour retirer le boîtier de la canette du crochet.
3. Relâcher le loquet du boîtier de la canette et celle-ci tombera facilement.
COMMENT ENLEVER LA BOîTE À CANETTE
1. Sacar la base de extensión de la máquina.Subir la aguja hasta su punto más alto, girando
manualmente hacia Vd. el volante.
2. Abrir la cubierta de acceso bobina, estirándola hacia abajo.Con los dedos, abrir el pestillo de la
cápsula bobina, tal como está mostrado, y sacar la cápsula bobina de la lanzadera.
3. Soltar el pestillo y la bobina se caerá de la cápsula.
EXTRACCION DE LA CEPSULA
BOBINA DE LA LANZADERA
INSERTING BOBBIN INTO BOBBIN CASE
1. Prenez le boîtier de la canette dans la main gauche et insérez la canette, le l étant
dans le sens des aiguilles d’une montre.
2. Passez le l dans la fente du boîtier de la canette.
3. Passez le l sous le ressort de tension.
4. Tirez 8 à 10 cms de l de la canette.
MISE EN PLACE DE LA CANETTE DANS LE
BOÎTIER DE LA CANETTE
1. Mantener la bobina en la mano derecha con el hilo corriendo en la dirección de las agujas del
reloj.
2. Insertar la bobina en la cápsula con alrededor de 10 cm. de hilo por fuera de la cápsula.
3. Tirar del hilo, a través de la abertura en la cápsula y luego por debajo del muelle plano de
tensión. Cuando esté en su sitio se sentirá un golpe seco.
4. Deje de 8 a 10 cms. de hilo fuera de la bobina.
INSERCION DE LA BOBINA EN LA
CAPSULA BOBINA
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 6199 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 6199 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 6199

Singer 6199 User Manual - German, Italian - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info