459430
17
Zoom out
Zoom in
Previous page
1/64
Next page
15
2
4
1
3
4. Start machine and the bobbin starts to wind. Bobbin
will automatically stop turning when completely
lled. Push shaft to the left to remove bobbin and
cut thread.
3. Place bobbin onto shaft with end of thread coming
from top of bobbin. Push bobbin winder shaft to the
right until it clicks. Hold the end of thread.
2.Put end of thread through the hole in bobbin as
shown.Push bobbin winder shaft to far left position,
if it is not already there.
1.Place a spool of thread on the spool pin, and secure
it with the spool pin cap. Pull the thread out from the
spool and place it through thread guides as shown
in illustration.Be sure to pull thread securely into the
bobbin winding tension disk.
WINDING THE BOBBIN
Be sure to use Class 15 bobbins.
1. Placez une bobine de fil sur un porte-bobine et
xez-la bien à l’aide du chapeau de bobine. Tirez
le fil hors de la bobine et faites-le passer par le
guide-l, comme indiqué dans l’illustration.Assurez-
vous de bien insérer le fil dans les disques de
tension du bobineur.
4. Mettre la machine en marche. La canette va
se remplir. Dès que la canette est pleine, elle
s’arrêtera de tourner. Arrêter la machine. Couper
le fil. Pousser l’ensemble axe canette vers la
gauche pour pouvoir enlever la canette pleine de
l’axe. Pendant la couture, l’axe doit toujours rester
à gauche.
3. Pousser le tout vers la droite jusqu’au déclic. Tenir
le bout de l à la verticale.
2. Faites passer l’extrémité du fil par le trou de la canette,
comme indiqué. Pousser l’axe du dévidoir vers la gauche,
placer la canette sur cet axe.
Assurez-vous d'utiliser des bobines de type
"Class 15"
Este seguro de usar bobinas clase 15.
PRÉPARATION DE LA CANETTE
4. Poner en marcha la máquina. El hilo que está sosteniendo se cortará. La bobina cesará de girar
cuando se haya llenado por completo. Empujar hacia la izquierda el eje para sacar la bobina.
1. Coloque el carrete de hilo en el porta carrete y asegúrelo con la tapa de pasador de carrete. Tire
del hilo hacia afuera del carrete y páselo a través de las guías de hilo tal como se indica en la
gura.
Asegúrese de jalar el hilo con rmeza en los discos de tensión del devanador de bobina.
DEVANADO DE LA BOBINA
2. Pase el extremo del hilo a través del agujero en la bobina tal como se indica. Empujar el eje del
devanador bobina hacia la posición maxima izquierda, si no está ya ahi.
3. Colocar la bobina en el eje, con el extremo del hilo saliendo por la parte superior de la bobina.
Empujar hacia la derecha el eje del devanador, hasta que se sienta un golpe seco. Retener el
extremo del hilo.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 6199 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 6199 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 6199

Singer 6199 User Manual - German, Italian - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info