617062
22
Zoom out
Zoom in
Previous page
1/64
Next page
20
NOTE: A quick way to pick up the
bobbin thread is, with straight stitch
selected, touch and release the
reverse switch.Your machine will
perform one down-up cycle and stop
with the needle up. Always stopping
with the needle “fully up” is one of
the features of your computer sewing
machine.
PICKING UP BOBBIN THREAD
REMARQUE: pour faire remonter
rapidement le fil de la canette, avec
le point droit sélectionné, touchez et
relâchez l’interrupteur de couture arrière.
La machine exécute un cycle et s’arrête
avec l’aiguille relevé.
C'est là une des caractéristiques de la
machine à coudre avec ordinateur.
NOTA: Una manera rápida de extraer
el hilo de la bobina es, con la puntada
recta seleccionada, pulse levemente el
botón de costura hacia atrás. Su máquina
realizará un ciclo hacia abajo-arriba y se
detendrá con la aguja levantada. Una de
las características de su máquina de coser
computarizada es que siempre se detiene
con la aguja “completamente arriba”.
RAPPEL DU FIL INFÉRIEURE
EXTRACCIÓN DEL HILO DE LA BOBINA
1. Alzar la palanca del pie prensatelas.
2. Manteniendo ojo el hilo de la aguja con la
mano izquierda, girar hacia usted el volante
con la mano derecha, hasta que la aguja
alcance su posición más alta.
1. Raise the presser foot lifter.
2. Holding needle thread loosely with your
left hand, turn hand wheel toward you
(counter-clockwise) with your right hand,
rst lowering the needle and continuing
until the needle comes to its highest
position.
1. Relevez le pied presseur.
2. Retenez légèrement le fil de l’aiguille
avec votre main gauche, faites tourner
le volant vers vous (sens antihoraire)
avec votre main droite, l’aiguille doit
descendre en premier lieu et continuer
de tourner jusqu’à ce que l’aiguille
atteigne sa position la plus haute.
3. Lightly pull up the top thread, and pick up
bobbin thread, which will appear through
the needle plate slot.
4. Pull both top and bobbin threads
together toward the back of the machine
under the presser foot, leaving about 6”
(15 cm) clear.
3. Tirez légèrement sur le fil du dessus,
et le fil de la cannette ainsi capturé
apparaîtra dans le trou de la plaque
d'aiguille.
4. Placez les deux ls sous le pied presseur
vers l’arrière en laissant dépasser
environ 15 cm (6 po) de l.
3. Tirar ligeramente del hilo superior y recoger
el hilo de la bobina, que aparecerá a través de
la abertura de la placa aguja.
4. Tirar de ambos hilos juntos, hacia atrás de
la máquina, por debajo del pie prensatelas,
dejando alrededor de 15 cm. de hilo.
1
2
3
4
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 5400 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 5400

Singer 5400 User Manual - German, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info