617062
20
Zoom out
Zoom in
Previous page
1/64
Next page
18
1
2
3
5
4
*Pass the thread through the thread take-up (3) from right to left.
*Pass the thread through the eye of the needle (5) from front to back. (See following
page for instructions on operation of the Automatic Needle Threader.)
1.) With the presser foot raised and the needle threaded, pull the thread. You should
detect only a slight resistance and little or no deection of the needle.
2.) Now lower the presser foot and again pull the thread towards the back of the
machine. This time you should detect a considerable amount of resistance and much
more deection of the needle. If you do not detect the resistance, this means you
have not threaded the machine correctly and need to rethread it.
C.Thread the machine with your left hand while rmly gripping the thread with your right
hand in the following order as illustrated.
IMPORTANT: To verify that the machine is threaded properly in the tension
discs, do this simple check:
C. Enlez le l de la machine avec votre main gauche tout en tenant le l fermement
de la main droite, dans l’ordre suivant comme montré dans l’illustration.
* Faites passer le l par le releveur de l (3) de la droite vers la gauche.
* Faites passer le l par l’orice de l’aiguille (5) de l’avant vers l’arrière. (Reportez-vous
à la page suivante pour les instructions concernant le fonctionnement de l’enleur
de chas d’aiguille automatique.)
1.) Avec le pied presseur relevé et l’aiguille non-enlée, tirez sur le l. Vous ne devriez
sentir qu’une légère résistance.
2.) Ensuite, abaisser le pied presseur et tirez de nouveau le fil vers l’arrière de la
machine. Cette fois, vous devriez sentir une forte résistance. Si vous ne sentez pas
de résistance, le l a été mal enlé et vous devez le ré-enler.
IMPORTANT: pour vous assurer que la machine est correctement pourvue de fil
dans les disques de tensions, effectuez cette simple vérication.
C. Enhebre la máquina con su mano izquierda mientras toma rmemente el hilo con su mano
derecha en el orden siguiente tal como está ilustrado.
* Pase el hilo a través del tirahilos (3) de derecha a izquierda.
* Pase el hilo a través del ojo de la aguja (5) de adelante hacia atrás. (Continúe con la página
siguiente por instrucciones sobre el funcionamiento del ensartador automático de agujas.)
IMPORTANTE: Para vericar que la máquina ha sido bien enhebrada en los discos de
tensión, realice esta vericación sencilla:
1.)Con el prensatelas levantado y la aguja sin enhebrar, jalar el hilo. Deberá detectar solo una
ligera resistencia y una pequeña o ninguna deexión de la aguja.
2.)Ahora vuelva a bajar el pie prensatelas y vuelva a tirar del hilo hacia atrás de la máquina. En
ese momento deberá detectar una cantidad considerable de resistencia y mucha más deexión
de la aguja. Si no detecta la resistencia ha enhebrado mal la máquina y deberá volver a
enhebrarla.
(C)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 5400 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 5400

Singer 5400 User Manual - German, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info