28560
152
Zoom out
Zoom in
Previous page
1/224
Next page
974-25007001/2.0 SL 30/35 Hull Sonar Operators Manual
Page 6.4 Installation, Start-Up and Test
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
6.2.2 Power Considerations
The display unit, generally, will require 110VAC or 240VAC, 50/60Hz or 12/24CDC,
+/- 10%. Depending on the capabilities of the unit chosen, it may automatically
detect the supply voltage or the unit may have to be ordered for the correct voltage.
The SL 30/35 operating panel / interface unit will operate from either 110VAC or
240VAC, 50/60Hz, +/- 10%. Details on selecting the proper voltage are indicated at the
rear of the unit. Failure to select the proper Input voltage will damage the internal
power supply. The safety fuses must also be changed to the proper rating.
The SL 30/35, HP, COMPAQ, PC Processing unit can be operated with either 110VAC
or 240VAC, 50/60Hz +/-10% input. Details on selecting the proper voltage are
indicated at the rear of the unit.
6.2.3 Connecting the Display Unit
Either a VGA monitor CRT type or a Simrad LCD monitor may be connected to the
SL 30/35 processing unit. Depending on which type of monitor is used, the video
output type must be set accordingly.
An industry standard VGA monitor will connect directly to the miniature DB-15
connector located on the rear panel of the processing unit unit.
The SL 30/35 Processing unit has a Dual Video interface card installed as standard
equipment. You must set up your display software as per your requirement. If you
have only one monitor, simply plug your monitor cable into the monitor connector
marked “Connector 1” on the adapter card, or Video “A” port. If you are using two
monitors, you must connect the 2
nd
monitor in the “Connector 2” on the adapter card,
or Video “B” port. Note that the SL 30/35 processing unit must be turned “OFF” prior to
connecting the second video monitor.
A User Guide manual is provided with the system, including a Recovery CD-ROM.
With this CD you can recover your system as delivered, run the diagnostics. Note: The
Dual video monitor software is installed at the factory, you only have to set up your
monitor configuration as per Window’s XP Pro.
Note!
All Device driver and utilities are preloaded on your system and
provided on a Driver, Utilities and Documentation CD-ROM. This
CD-ROM also includes tips for re-installing the operating system.
152


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SL35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SL35 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info