28560
151
Zoom out
Zoom in
Previous page
1/224
Next page
SL 30/35 Hull Sonar Operators Manual 974-25007001/2.0
Installation, Start-Up and Test Page 6.3
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
6. INSTALLATION, START-UP AND TEST
6.1 INSTALLATION PROCEDURE
The installation of the SL 30/35 Hull Sonar involves the following steps:
Deciding on the locations in the wheelhouse for the surface units.
Mounting the surface units and making the connections between the SL 30/35
Processing Unit, Keyboard/Interface Unit, the Display Unit and other optional
equipment being installed.
Assembling the Hull Unit in the sonar room.
Mounting the Hull Unit and completing all aspects of the installation.
Running up the system to verify proper operation, system configuration and
perform initial system tests.
6.2 SURFACE UNIT ELECTRONICS INSTALLATION
The following section will describe the installation procedure for the bridge unit
requirements.
6.2.1 Mounting of Units
The display unit should be located in the wheelhouse in a place that provides a good
view of the screen and avoids direct sunlight, if possible. Depending on the monitor
that was selected, the unit may be mounted on top or recessed into the bridge
console. Simrad supplied display units include the necessary mounting brackets.
The SL 30/35 Operating Panel unit should be mounted in close vicinity to the
operator's position in the wheelhouse and near the display unit. The unit may be flush
mounted into the bridge console.
The Processing Unit may be mounted inside the bridge console. Sufficient space
should be left around the processing unit for proper ventilation.
Optional equipment for interface to the processing unit may be mounted in any
convenient location, provided the user supplied interconnect cables are of sufficient
length and the required power is available.
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SL35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SL35 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info