583422
12
Zoom out
Zoom in
Previous page
1/72
Next page
Simrad - RS12 Operation and Installation Instructions12
PAUSE DISTRESS CALL mode only: Pause the automated distress alert resend countdown
timer.
SCAN Scan
Press to scan between your current channel and the priority channel in DUAL or
TRI WATCH mode. The weather channel is also scanned if the USA channel bank is
selected and the weather alert mode (ALT) is ON.
Hold down SCAN to enter ALL SCAN mode where the priority channel is checked
every 1.5 seconds.
When a signal is received, scanning stops at that channel and
BUSY
appears on
the screen. If the signal ceases for more than 5 seconds, the scan restarts.
Press ENT to temporarily skip over (lock out) an “always busy” channel when in ALL
SCAN mode and resume the scan. If a channel is skipped, the word ‘SKIP ON’ will
momentarily replace the channel name shown on the LCD to designate a skipped
channel. The channel name will then have ‘ *’ appended to the end of the channel
name. Note that it is not possible to skip over the priority channel.
To cancel a skipped channel, select the channel while in normal mode (non-scan
mode) then press the ENT key - ‘SKIP OFF’ will be displayed momentarily and the
channel will be restored. Alternatively, you can re-power the radio.
Press SCAN to stop at the current channel.
Press ESC to cancel scan mode and return to normal operation.
DISTR. CANCEL DISTRESS CALL mode only: Press to send a distress cancel call.
CH + / - Channel Select
Also located on the handset mic. The current channel is shown on the screen in BIG
digits with an appropriate designator suffix A or B in small letters below the channel
number (if applicable).
Press + or - to step through the available channels one at a time, or hold down to
scroll rapidly through all the available channels.
See Appendix C for a complete listing of channel charts.
Alphanumeric Entry
This key can be used for both menu selection and for alphanumeric entry. Press + or -
to scroll the cursor up or down to menu options when navigating menus.
When editing an item containing only numbers, press - to count through the numbers
or hold down to scroll rapidly.
To enter a character, press + to step through the alphabet or hold down to scroll
rapidly.
SILENCE DSC Call mode only: Press + or - key to silence the call alert when a DSC call is
received.
DIM Dim
Press to Dim the LCD and keypad lighting. There are 8 levels from OFF to full
brightness.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

simrad-rs12-vhf

Reset search

  • Model RS-12 Microphone coiled cord has completely dis-integrated as the black plastic/rubberized coating of the internal cord wires peeled off. The radio is kept in a weather proof compartment and not exposed to elements. Poor quality of the microphone coiled cord.

    Can a replacement microphone cord be attached by user ? Is it necessary to get marine electronics to install new cord ?

    Can you advise availability of replacement cord please.


    Captain Sheldon Evans
    emaIL: sheldonevans@aol.com
    Submitted on 9-12-2021 at 16:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad RS12 VHF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad RS12 VHF in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info