23336
287
Zoom out
Zoom in
Previous page
1/322
Next page
Sensor test procedures
275
850-165186 / Rev.B
- Note that the weight of the sensor in water
(approximately 1.4 kg) may not provide sufficient
resistance to trigger the sensor function when the
detector wirer are pulled. Apply extra weight if
required.
4 Turn off the PI system’s interference f ilter, and observe
the numeric display.
- If the interference symbol is not displayed, leave the
interference filter switched off to increase the system’s
range and performance.
Note: Should any problems arise during this procedure, check that the
communication channel and update rate has been configured
correctly.
5 Check that the information from the sensor is displayed on
the PI.
6 Engage the sensor, and check that this is registered by the
PI.
7 Check the PI Status Display, and record the signal
strength.
8 Switch on the vessel’s echo sounders and other
hydroacoustical equipment used during normal fishing
operations.
9 Switch the PI54 interference filter on and off, and observe
the numeric display. If the interfer ence symbol is not
when the filter is off, leave the interference filter switched
off to increase the sys tem’s range and performance.
10 Use a water-proof pen, write the sensor’s number,
configured channel number and any other pertinent
information on its label.
- A dedicated form has also been provided in the front of
the PI Operator Manual to record this information.
Note: Do not write on the sensor! Such information may be
misunderstood when future service or replacement is performed.
287


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad PI54 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad PI54 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad PI54

Simrad PI54 User Manual - Norwegian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info