657865
27
Zoom out
Zoom in
Previous page
1/32
Next page
Instruction Manual
27
E04054
A three way joiner (part no. SDJ) is available as a separate
accessory (Fig 4.16) -
NOTE If the boat is fitted with more than one IS12 instrument, it
should be noted that it is not necessary to plug the wind trans-
ducer cable directly into the back of the wind instrument - any
spare network port can be used.
NOTE If the Wind system is being added to an existing IS12 installa-
tion with a network terminator fitted, this should be removed
as the masthead transducer already has an inbuilt terminator.
4.4 Electronic Interference Suppression
IS12 has been designed to minimise the effects of interference
generated by the engine alternator. However, precautions
should still be taken by routing the cables away from the
engine compartment. Do not run the cables down trunking
carrying high current cables. The transducer cable should also
be kept separate from the boat’s radio antenna cable if possible.
Engines with spark ignition, also some refrigerators should be
fitted with suppressors. Your local agent should be able to
advise on this and supply suppression kits where necessary.
The transducer is connected to the instrument using the spare
network port on the rear of the instrument (Fig 4.17) -
Fig 4.16 - Three way joiner
Three Way Joiner SDJ
Fig 4.17 - Transducer Connections
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad IS12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad IS12 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad IS12

Simrad IS12 User Manual - German - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info