23320
14
Zoom out
Zoom in
Previous page
1/108
Next page
901-10037001/1.1 FS 20/25 Operators Manual
Page 1.6 System Familiarization
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
1.1.6 Deployment Housing Unit
The trawl deployment housing unit is made from polyurethane and designed for the
harshest of environments, yet it is easy to handle. The FS 20/25 trawl unit contains
the vertical sonar head, the horizontal scanning trawl sonar, the temperature and
depth sensor module and the catch receiver. The mounting kit supplied contains the
strain relief and other hardware for attaching the trawl cable to the trawl headrope.
The trawl cable is connected to the trawl sonar by a watertight connector and a
locking sleeve. Commands are sent down the cable from the processors to operate
the sonar. The sonar image and sensor data are sent up the cable to the processor
and displayed on the appropriate monitor.
1.1.7 Jointing Tool
Jointing tools and materials are required for splicing the trawl cable and attaching
the trawl “pigtail” connector to the trawl sonar. Simrad supplies jointing tool kits
especially designed for coaxial cable with a breaking point of 1500kg. The jointing kit
will allow you to make 10 cable joints.
1.1.8 Catch Sensors
The catch sensor “eggs” are wireless sensors mounted on the cod-end of the trawl
net to detect the stretch of the net as it fills up with the catch. When sufficient stretch
of the net occurs, the catch sensor sends an acoustic signal to the trawl sonar
sensor module through the catch receiver.
This information is then sent to the processor and displayed on the monitor.
The sensors are of a rugged construction in order to withstand the strain from
winches and the power block. The operator can use up to four sensors
simultaneously. The catch sensors are equipped with rechargeable batteries.
1.1.9 Printer Option
A parallel output port is available on the rear panel of the HP PC processor unit for
connecting a HP DeskJet color printer. This option allows hard copies of the Sonar
images to be printed using another software application “PC Paint”.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad FS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad FS20 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info