28530

Simrad ER60 Manual

47
Zoom out
Zoom in
Previous page
1/182
Next page
Operational procedures
39
850-164692 / Rev.B
In order to allow the echogram to indicate the depth where the
selected back-scattering is reached, make the following settings:
• In the Echogram dialogue box, set Backscatter = Sv
(20 Log TVG).
• In the Colour Scale dialogue box, set the desired lower Sv
limit.
Example: If the desired lower Sv limit is -70 dB, and at the
same time a signal-to-noise ration of 10 dB is required, the
setting in the Colour Scale dialogue box for 20 log TVG
must be -80 dB. The depth where the light grey colour
appears on the echogram then indicates the maximum depth
where the desired Sv limit is obtained with a signal-to-noise
ratio of 10 dB.
When you select Backscatter = Sp (40 log TVG) in the
Echogram dialogue to record single object target strength, the
desired lower TS limit has to be set in the same way as above.
Example: If the desired lower TS limit is -50 dB, and at the
same time a signal-to-noise ratio of 10 dB is required, the
setting in the Colour Scale dialogue box for 40 log TVG
must be -60 dB. The depth where the light grey colour
appears on the echogram then indicates the maximum depth
where the desired lower TS limit is obtained with a
signal-to-noise ratio of 10 dB.
When the trial has been completed, the corresponding noise
level in dB re 1 µPa can be calculated for the described
procedure.
The instantaneous background noise is based upon one single
echo sample out of a fixed number of equidistant echo samples.
λ Wavelength = c/f
c Speed of sound (m per sec)
f Frequency (Hz)
G Transducer gain (dB)
SaCorr Sa correction value (dB)
The current transducer gain is found in the Tr ansducer
Parameters dialogue box.
Print the next table, and use it to fill in the measured values.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info