Manual Simrad Broadband 3G Radar (page 19 of 36) (English)

634489

Zoom out

Zoom in

1/36

RI10 Connections | Broadband 3G/4G™ Radar Installation Guide

RI10 Connections

1. Connects the RI10 to a SimNet or NMEA2000 network to allow heading and position infor-

mation to be sent to the scanner for MARPA calculations

2. Main data network interface between the radar and the display (ethernet)

3. Provides data and power connection between the Broadband radar dome and the RI10.

4. Power cable (see “Connect power” on page 18)

5. Green LED indicates power is supplied to the RI10 and indicates SimNet state. A sequence

of three rapid  ashes indicates no SimNet connection was made at time of power up and a

solid light means SimNet connection was lost after power up

 Note: Lowrance HDS units sold in the USA do not require an interface box and the scanner

connects directly to the display or Ethernet switch. If chart overlay or MARPA are required for

Lowrance HDS USA then an RI10 Interface box and heading sensor are required

Adding MARPA and / or Chart Overlay

To add MARPA and/or Chart overlay, it is essential to use a heading sensor with an output speed

of 10 Hz. The Heading sensor needs to be a rate gyro stabilized compass or better

You can use a Heading Sensor with an NMEA 0183 or NMEA2000 output source

You must use a Radar Interface box to connect the heading data to the radar system - this is

because MARPA calculations are done by the radar:

• If your heading source is NMEA0183, use an RI11 Interface box for Simrad NX installations,

or an RI10 Interface box with an AT10HD converter for all other installations. The AT10HD

converts NMEA0183 to SimNet / NMEA2000 (only heading information is converted)

• If your heading source is NMEA2000 or SIMNET use an RI10 Interface box.

RADAR_3G_4G_IG_988-10113-003_EN_P.indd 17 2/11/2011 6:09:08 p.m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Simrad Broadband 3G Radar in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Simrad Broadband 3G Radar Manual

Product: