634487
17
Zoom out
Zoom in
Previous page
1/54
Next page
Installation | 15
Rotate the feedback transmitter lever to centre position.
(Use the alignment mark to line up the transmitter lever
to be opposite the cable entry into the feedback).
Carefully observe the alignment marks. A rudder
feedback alarm may be the result if the alignment
instructions as per Figure 2-5 are neglected.
Figure 2-5 Rudder feedback mounting (019356)
Note that the transmitter lever has two slots for the
transmitter link. The slots enable maximum flexibility to
provide the 1:1 mechanical linkage relationship. As a
starting point, set the transmitter rod to the inner limit of
the outer slot if possible. (Refer to Figure 2-5). Drill and
tap the rudder tiller arm so that the Y1 dimension is
equal to the Y2 dimension (Use 4.2 mm drill and 5 mm
tap). Attach the ball joint to the tiller arm, and connect
the transmitter rod to the ball joint at the rudder tiller
arm.
Tighten the mounting screws for both the feedback unit
and the transmitter rod ball joint.
Observe the feedback unit while someone turns the helm
wheel through the complete travel H.O. to H.O. and
verify that the mechanical linkage moves freely.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad AC12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad AC12 in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info