575325
35
Zoom out
Zoom in
Previous page
1/45
Next page
37 GB/MT
Operation
˽ Press the Digital timer / UNIT / Alarm / -
button
4
to start the alarm function. The
Alarm symbol
18
appears in the display.
˽ You can switch off the alarm function by
pressing the Digital timer / UNIT / Alarm / -
button
4
again. The Alarm symbol
18
disappears from the display.
˽ When the set alarm time is reached, an
audible alarm signal sounds for about one
minute.
˽ No audible alarm signal sounds if the set
time is reached when the device is in the
weighing mode. Instead the Alarm symbol
18
flashes in the display.
Note: If no button is pressed within a period
of two minutes, the kitchen scale’s display
automatically shows the time.
©
Using the digital timer
˽ Press the MODE / + button
5
until the
device enters the digital timer mode. This
comes after the alarm function.
˽ Press the SET / WEIGHT MODE button
3
to enter the settings mode. The seconds
display value flashes.
˽ You can use the MODE / + button
5
or the
Digital timer / UNIT / Alarm / - button
4
to
set the value.
˽ Press the SET / WEIGHT MODE button
3
to store the set value and move on to setting
the minute display value. The minute display
value flashes.
˽ You can use the MODE / + button
5
or the
Digital timer / UNIT / Alarm / - button
4
to
set the value.
˽ Press the SET / WEIGHT MODE button
3
to store the set value and leave the settings
mode.
˽ Press the Digital timer / UNIT / Alarm /
- button
4
to start the digital timer. The digital
timer indicator
21
appears in the display.
Note: While the digital timer continues to
run, you can switch the device to another
function by pressing the MODE / + button
5
.
The digital timer indicator
21
then continues
to appear in the display.
˽ You can switch off the digital timer by press-
ing the Digital timer / UNIT / Alarm /
- button
4
again. The digital timer indicator
21
disappears from the display.
˽ When the set time expires, an audible alarm
signal sounds for about one minute and the
previously set time appears on the display.
˽ No audible alarm signal sounds if the set
time is reached when the device is in the
weighing mode. Instead the digital timer
indicator
21
flashes in the display.
Note: If no button is pressed within a period
of two minutes, the kitchen scale’s display
automatically shows the time.
©
Resetting the settings
˽ The reset button
11
can be found on the
back of the housing. Press this button to reset
all the settings to the default factory settings.
©
Replacing the batteries
˽ When the batteries become weaker, the
battery charge state indicator
19
in the
display will light up.
˽ Replace the batteries as soon as the symbol
” appears in the display. Weak or ex-
hausted batteries can affect the accuracy of
the measurement results.
˽ Open the battery compartment
8
on the
back of the scale.
˽ Remove the discharged batteries and dispose
of them properly in accordance with the ap-
plicable regulations (see section “Disposal”).
˽ Insert two new batteries type CR2032,
3 V
into the battery compartment
8
.
Make sure you fit the batteries the right way
round (polarity). The correct polarity is
shown under the battery compartment
8
.
˽ Then close the battery compartment
8
.
63925_silv_Digitale_Küchenwaage_content_LB5.indd 37 21.02.11 17:13
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest Z30170 - IAN 63925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest Z30170 - IAN 63925 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest Z30170 - IAN 63925

Silvercrest Z30170 - IAN 63925 User Manual - German, Dutch, French, Italian - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info