575325
33
Zoom out
Zoom in
Previous page
1/45
Next page
35 GB/MT
Installation / Bringing into use / Operation
1. Remove the wall bracket
10
from the back of
the housing by sliding it downwards (Fig. A).
2. Mount the wall bracket
10
vertically in the
desired position on the wall with the sup-
plied screws
7
and dowels
6
.
Note: The supplied dowels are intended for
use in ordinary solid masonry. Seek expert
advice on suitable fixings if the device is to
be fixed to another type of wall construction.
3. Pull the separation strip out of the battery
compartment
8
.
4.
Then mount the scale on to the wall bracket
10
.
Note: Measuring accuracy may be detri-
mentally affected if the device is not in-
stalled vertically.
©
Bringing into use
©
Setting the time
˽ Press the MODE / + button
5
until the
device enters the clock mode.
˽ Press the SET / WEIGHT MODE button
3
to enter the settings mode. The minute dis-
play value flashes.
˽ You can use the MODE / + button
5
or the
Digital timer / UNIT / Alarm / - button
4
to set the value.
Note: If you keep these buttons
4
,
5
pressed, you can accelerate the process
and reach the desired value more quickly.
˽ Press the SET / WEIGHT MODE button
3
to store the set value and move on to setting
the hour display value. The hour value flashes.
˽ You can use the MODE / + button
5
or the
Digital timer / UNIT / Alarm / - button
4
to
set the value.
˽ Press the SET / WEIGHT MODE button
3
to store the set value and leave the settings
mode.
Note: If no key is pressed within 10 seconds,
the set value will stop flashing and the time
is set to the value shown in the display.
©
Operation
The device has five functions:
1. Time display
2. Weighing
3. Temperature display
4. Alarm function
5. Digital countdown timer
˽ You can switch between the various func-
tions by pressing the MODE / + button
5
.
©
Using the time display
˽ Press the MODE / + button
5
until the de-
vice enters the clock mode.
˽ The display shows the time (hours:minutes).
˽ If you wish to change the time to another
value, proceed as described in the section
“Setting the time”.
Note: The device continues to show the
time unless the device is switched to anoth-
er function by you pressing the MODE /
+ button
5
.
©
Using the scale
Note: When using this product as a tabletop
unit, make sure it is placed on a solid and flat
surface for the weighing process.
˽ Fold down the glass plate
9
.
˽ Place the weighing bowl
1
on the device’s
weighing platform.
˽ If necessary press the MODE / + button
5
until the device enters the weighing mode.
This comes after the time display.
˽ You can press the SET / WEIGHT MODE
button
3
to switch between the weighing
mode settings for weight
17
, water
16
and
milk
15
. The selected weighing mode set-
ting is indicated by a small bar indicator in
the display.
63925_silv_Digitale_Küchenwaage_content_LB5.indd 35 21.02.11 17:13
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest Z30170 - IAN 63925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest Z30170 - IAN 63925 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest Z30170 - IAN 63925

Silvercrest Z30170 - IAN 63925 User Manual - German, Dutch, French, Italian - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info