738922

Silvercrest SWKD 3000 A1 IAN 67146 Manual

32
Zoom out
Zoom in
Previous page
1/42
Next page
- 30 -
As soon as the water temperature falls below the set
temperature, the kettle heats up again automatical-
ly. The LED
q
of the currently selected temperature
setting blinks until the selected temperature has
been regained. Afterwards, it glows constantly
again.
After 30 minutes the kettle switches itself off. Two
signal tones sound. All LEDs extinguish.
Information
- At any time you can cancel the temperature main-
tenance of the water by pressing the On/Off
button
e
or the KEEP WARM button
w
.
- Once you lift the kettle from the base
y
, the
appliance switches all functions off.
Note
Do not let the water stand in the kettle for longer
than is absolutely necessary. That would lead to
scale deposits. Pour away the water that is no
longer required.
Cleaning and Care
Danger
Do not open any part of the housing. There are no
user-serviceable elements inside. An open housing
increases the risk of receiving a potentially fatal
electric shock.
Under NO circumstances may the appliance
parts be immersed in water or other liquids!
Should residual liquid be on "live" parts during
use, there would be the risk of receiving a
potentially fatal electric shock.
Before cleaning the appliance, ....
• first disconnect the plug from the mains power
socket and allow the appliance to cool down.
• Clean all exterior surfaces and the power cable
with a slightly moist cloth. In all cases, dry the
appliance well before using it again.
• To clean the inside of the kettle, thoroughly rinse
it out with water and then pour the water away.
• Do not use detergents, abrasives or solvents.
These can damage the appliance.
In the event of scale deposits:
• Before descaling, remove the pourer sieve
i
(see chapter "Removing/replacing the pourer
sieve").
• Use a descaler designed for household appliances
(e.g. for coffee machines). Pay heed to the in-
structions given for the descaler.
• For the stainless steel container bottom, you can
use a suitable product from a specialist dealer.
Removing/replacing the pouring sieve
• Open the lid.
• Press the tab at the upper end of the pourer
sieve
i
down and, simultaneously, push the
pourer sieve to the inside.
• You can then lift the pourer sieve
i
up and out
of its holder.
• Clean the pourer sieve
i
with a lightly moistened
dishcloth and under running water.
• After cleaning, insert the pourer sieve
i
from
above and then push it forward so that the tab
locks into place. Ensure that the pourer sieve
i
grips into the holder at the lower end and is
firmly seated.
• Should any scale deposits have set on the pourer
sieve
i
, soak it for a few hours in a water-vinegar
solution at a ratio of 6:1. The scale deposits will
dissolve themselves. Rinse the pourer sieve
i
with copious amounts of clear water.
IB_67146_SWKD3000A1_LB5 29.06.2011 9:52 Uhr Seite 30
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SWKD 3000 A1 IAN 67146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SWKD 3000 A1 IAN 67146 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SWKD 3000 A1 IAN 67146

Silvercrest SWKD 3000 A1 IAN 67146 User Manual - German, Dutch, French, Italian - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info