738922

Silvercrest SWKD 3000 A1 IAN 67146 Manual

31
Zoom out
Zoom in
Previous page
1/42
Next page
- 29 -
Keeping water hot
With this kettle you can maintain the water at a
temperature of (about) 40°C, 60°C, 80°C or
100°C for 30 minutes. Should you have set the
desired temperature maintenance at 100°C, to
avoid excessive steam development the kettle holds
the water at a temperature of between about 90°C
and 100°C. If the desired heating maintenance
temperature is 80°C, 60°C or 40°C, the water he-
ater holds the water at a temperature of between
about 8°C above or below the selected temperature.
Important
Use the keep-warm function only when there is at
least 0.5 liters of water in the kettle. If there is less
water in it, the kettle may be switched off within the
30 minutes in order to protect the heating element.
Warning
BEFORE you lift the kettle from the base
y
, first
disconnect the plug from the mains power socket. This
prevents causing a short circuit by water possibly spil-
ling out of the kettle and falling onto the live
electrical connections in the base
y
.
Risk of personal injury
For safety reasons, the lid should not be opened
while the water is boiling or is very hot. There is
a risk of receiving severe scalds.
The keep-warm setting can be made before, during
or immediately after the boiling process:
Information
If you cannot set the desired temperature, it may be
because the temperature of the water in the kettle is
still too high.
BBeeffoorree tthhee bbooiilliinngg pprroocceessss
• Before the boiling process, press the KEEP
WARM
w
button.
• Press the button SET TEMP
r
repeatedly until
the LED
q
at the desired temperature glows.
• Press the button Start to begin the boiling and
then the keep-warm process.
The LED
q
of the currently set temperature glows,
the LED integrated in the KEEP WARM
w
button
glows as well as the LED in the On/Off
e
button.
The water will now also be kept warm after being
heated.
DDuurriinngg tthhee bbooiilliinngg pprroocceessss
• Start the boiling process as described in the
section "Heating water".
• During the boiling process, press the KEEP
WARM
w
button.
On completion of the boiling process the LED
q
of
the currently set temperature glows, the LED integra-
ted in the KEEP WARM
w
button glows as well as
the LED in the On/Off
e
button.
The water will now also be kept warm after being
heated.
AAfftteerr tthhee bbooiilliinngg pprroocceessss
• After the signal tone, indicating the end of the
boiling process, press the button KEEP
WARM
w
.
The appliance will then automatically maintain the
keep-warm temperature at the temperature you
selected to heat the water. The LED
q
of the cur-
rently set temperature glows, the LED integrated
in the KEEP WARM
w
button glows as well as the
LED in the On/Off
e
button. The water will now
be kept warm.
IB_67146_SWKD3000A1_LB5 29.06.2011 9:52 Uhr Seite 29
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SWKD 3000 A1 IAN 67146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SWKD 3000 A1 IAN 67146 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SWKD 3000 A1 IAN 67146

Silvercrest SWKD 3000 A1 IAN 67146 User Manual - German, Dutch, French, Italian - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info