484261

Silvercrest SSR 1080 B2 Manual

125
Zoom out
Zoom in
Previous page
1/140
Next page
Satellite Receiver SSR 1080 B2
English - 123
TP
Press the [Yellow] button (23) to edit the transponder lists. In the first
column you can press the or navigation buttons (26) to select
a satellite position. The second column shows the existing
transponders. The signal strength (S) and signal quality (Q) of the
selected transponder are displayed.
Press the [Red] button (39) to add a new transponder for the
selected satellite.
Frequency
Enter the frequency of the satellite transponder. You can enter the
value directly by using the numeric buttons (20).
Symbol Rate
The most common symbol rates of satellite transponders use the
27500 or 22000 values. You can enter the value directly by using
the numeric buttons (20).
Polarization
Satellites broadcast signals with vertical and horizontal polarity.
Select the desired polarity Horizontal or Vertical.
Note: The common notation 12480H means: Frequency 12,480
MHz and horizontal (H) polarisation.
S2 Mode
Specify whether the transponder broadcasts in DVB S2 mode or
not.
Modulation
Select the modulation. The following options are available: QPSK
and 8-PSK.
FEC Rate
Enter the FEC rate or select Auto to have the system set this value
automatically.
Pilot
Select the pilot parameters. The following options are available: On
Off.
To save the settings, press the [Red] button (39).
Press the navigation button (26) to switch to the transponder list.
Use the or navigation buttons (26) to highlight the desired
transponder and then press OK/ENTER (25).
Tp Edit
Press the [Green] button (38) to edit the selected transponder. Refer
to the settings described above.
Delete
Press the [Yellow] button (23) to delete the selected transponder. A
safety prompt will appear. Select “Yes” on the safety prompt to
delete the transponder definitely. Or select “No” to cancel.
Note: Here you can select and delete multiple transponders by
pressing the OK/ENTER button (25).
… 125 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info