484261

Silvercrest SSR 1080 B2 Manual

123
Zoom out
Zoom in
Previous page
1/140
Next page
Satellite Receiver SSR 1080 B2
English - 121
Manual search satellite
This option lets you scan an individual transponder or edit
additional antenna settings. Select the satellite that you want to scan
for new channels and press the OK/ENTER button (25). A new
window with default settings opens on the right hand side of the
screen.
Edi
t
Press the [Green] button (38) to edit additional antenna settings or
to scan an individual transponder. A new window will open (see
figure opposite).
Signal Level Indicators
The signal strength (S) and quality (Q) are displayed on the right.
Point your antenna so that the Signal Strength and Signal Quality
reach their maximum.
Satellite
Shows the satellite position currently selected.
LNB Power
This option is used to supply power to the LNB and allows polarity
switching.
Note: We recommend that you always have the LNB Power on,
unless you are explicitly instructed to disable this function. This is
occasionally necessary for antennas for larger community
buildings.
LNB Frequency
The default value “9750/10600” is normally good for all
conventional LNBs. Please select the settings below only if explicitly
instructed to do so in the antenna installation manual.
User Bank
You cannot change this option. This setting is adjusted
automatically for Unicable systems.
Band Frequency
You cannot change this option. This setting is adjusted automatically
for Unicable systems.
0/22KHz
The 22 kHz signal is used to switch the frequency band for a
universal LNB (off = Low Band, 22 kHz = High Band). Select
“Auto” to have the system switch automatically. If you are not using
a conventional LNB, you may need to adjust this setting manually
here.
DiSEqC 1.0
DiSEqC 1.0 allows up to four different satellites to be received. If
using DiSEqC 1.0, you can assign a port for every satellite position
selected. If you’re not using DiSEqC 1.0, select “Off”.
… 123 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info