472129
15
Zoom out
Zoom in
Previous page
1/53
Next page
Digital HD Satellite Receiver SSR 1080 A1
English - 13
The following video signals are supported:
HDMI: The HDMI output guarantees optimum video and audio quality. Note: This device has a
standardised HDMI output. However, it is possible that picture or sound distortion may occur when
connecting devices of first-generation HDMI input interfaces.
In such cases you can select one of the following connection options:
RGB: Very good picture and sound quality via a common (21-pin) SCART (Euro AV) cable.
YUV: High-end picture output via the 3 "YPbPr" Cinch-type connectors for connecting a TV set or
beamer.
Dolby Digital Sound (AC3)
Please note that Dolby Digital sound, if broadcast by the tuned-in channel, will only be available on
the digital audio output and HDMI output whenever these are connected to an external AV receiver.
OSD Menu
Once you have fully read the Safety Instructions and have finished connecting the devices as
described, you can power it on. The satellite receiver has already been configured in factory so that
no or only a few changes need to be made.
You can use the OSD (On Screen Display) menu to customise your satellite receiver according to
your needs. To open it, press the MENU button (22). To quit the OSD menu, press the MENU button
(22) or the EXIT button (33) as many times as necessary to hide all menus. The OSD menu is clearly
structured and any buttons that you may need to press to adjust a setting will be shown on screen.
Navigating the OSD menu is controlled via the navigation buttons (23).
For greater user-friendliness, the OSD menu has been subdivided into the Simple Mode and Expert
Mode sections. The basic functions of your satellite receiver can be found in Simple Mode while all
functions can be found in Expert Mode. These are explained in more detail in the following pages.
Press the MENU button (22) and select Expert Mode to display the main menu. From this menu you
can open different submenus allowing you to adjust some of your satellite receiver's settings. You
can customise the OSD menu appearance, add or remove channels, customise the satellite receiver
for your satellite system, install new software via satellite antenna and much more. However, it is
also possible to miss-set some parameters and obtain a blank screen. Therefore you should read the
following instructions carefully.
In order to open the advanced menu you may need a password. The factory-default
password is: 0000.
Opening and Navigating the Submenus
After opening the main menu, the last-selected menu will still be highlighted. Press the or (23)
navigation buttons to toggle between the main menu and the submenu items. Press the OK button
(34) to open the submenus. Press the or (23) navigation buttons to highlight the desired
submenu item and then press OK (34) to open it.
Closing the Menus
The menus either close automatically after confirming your settings with OK (34) or you can close all
opened submenus sequentially by pressing EXIT (33) or MENU (22) multiple times.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 A1 in the language / languages: English as an attachment in your email.

The manual is 10,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSR 1080 A1

Silvercrest SSR 1080 A1 User Manual - German, Dutch, French, Italian - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info