472129
13
Zoom out
Zoom in
Previous page
1/53
Next page
Digital HD Satellite Receiver SSR 1080 A1
English - 11
Connecting the Satellite Receiver
You should only connect your satellite receiver to the mains once all other cable
connections have been made. This will avoid any accidental damage to the satellite
receiver or any external devices.
A Connect the LNB of the satellite antenna to the LNB IN (10) of your satellite receiver.*
B Connect the TV set (or beamer) to the HDMI connector (12) of your satellite receiver (see page
12 – HDMI Connection).
C If your TV set (or beamer) does not feature any HDMI port, you can use the TV SCART (13)
terminal to connect it to the satellite receiver.
D Furthermore, you can connect your TV set (or beamer) to the Component Video output YPbPr
(14) of your satellite receiver.
E You can use the IF OUT (9) output of your satellite receiver to connect another satellite receiver.
F Thanks to the USB port (11) you can connect any USB storage devices for recording and
playing back TV and radio programmes.
G In order to obtain good sound quality, you can use the L/R stereo outputs (15) of your satellite
receiver to connect an external Hifi amplifier.
H If your amplifier features a coaxial SPDIF connector, you can use the SPDIF (16) terminal to
connect it to the satellite receiver.
I Connect the power cord (17) to a wall outlet after you have finished connecting all cables.
*If you want to use the device with satellite systems capable of receiving more than one satellite, a
DiSEqC
®
LNB must be used instead of a universal LNB.
USB Connection
When connecting a device that has no external power supply, make sure that the
total current consumption for the USB power supply does not exceed 500mA
otherwise the USB devices may fail or even cause damage to occur to the satellite
receiver. USB storage devices requiring more than 500mA of current such as hard
disks with a USB Y cable or hard disks with an external power adapter should be
connected to an external power source in order to avoid any damage to the satellite
receiver or the USB storage device.
You can connect devices such as an external USB hard disk to the USB port, allowing recording and
playback of TV and radio programmes when properly connected.
Please note that compatibility issues may occur, as there are many different computer hard disks and
a variety of IDE/SATA-to-USB adapters on the market. Should you experience any compatibility
problems, we recommend that you try replacing the hard disk with a different one.
The USB interface of your satellite receiver remains idle when the satellite receiver is in Standby
mode, so that timer recording from Standby mode is possible at all times. This means that the hard
disk is still powered from the USB port. If you are planning not to use the satellite receiver for a long
time we recommend that you disconnect the satellite receiver and the hard disk from the power
supply.
First-Time Setup:
If it is still powered on, power the device off by using the power button (1) on the front panel. Connect
the USB hard disk to the USB port (11) located on the back panel of the satellite receiver and power
the satellite receiver back on. Shortly after the satellite receiver powers on, the message "USB
device is connected!" will appear on the screen.
If this does not happen, please first double-check in Menu (Simple Mode or Expert Mode) | Media |
HDD Information if the satellite receiver has detected the hard disk.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSR 1080 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSR 1080 A1 in the language / languages: English as an attachment in your email.

The manual is 10,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSR 1080 A1

Silvercrest SSR 1080 A1 User Manual - German, Dutch, French, Italian - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info