646943
10
Zoom out
Zoom in
Previous page
1/74
Next page
8
GB
7. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric shock!
~ Pull out the mains plug7 from the wall
socket before cleaning the Smoothie
Blender.
~
The motor unit
1
, the housing
3
, the pow-
er cable and the mains plug
7
must not
be immersed in water or other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water should
be sufficiently clear for you to see the blade
assembly4 easily.
WARNING! Risk of material damage!
Do not use any astringent or abrasive clean-
ing agents.
NOTE:
The following parts can be cleaned in the
dish washer:
- the blender jug6/8 and its lid11,
- the spill tray12.
After every use
Preferably clean the device after each use
and remove all food residues from the blade
assembly.
1. Fill the cleaning jug8 with clear water
and, if necessary, a little detergent.
Then rinse with clear water.
2. Operate the device as described
(Chapter "Operation" on page 6).
3. Disconnect the mains plug7 from the
wall socket.
4. Pivot the motor unit1 upwards. If there
are still bit of food (e.g. fruit cores) on
the sealing ring14, wipe it down with
kitchen roll in order to ensure its seal-
ing function. If necessary, perform an
intensive cleaning (see below).
5. Wipe the housing3, motor unit1 and
the power cable7 with a damp cloth if
necessary. Dry with a dry cloth.
6. The rest of the parts can be cleaned
with warm water and some detergent.
7. Allow all parts to dry completely before
you put them away or use the device
again.
Intensive cleaning
If food residues can no longer be removed
by using the cleaning blender jug, the blade
assembly should be removed from the de-
vice and should be cleaned separately.
1. Pull out the mains plug7.
2. If necessary, pull the blender jug6 anti-
clockwise and pull it down and off the
blade assembly4.
3. Rotate the motor unit1 right to the top
until it locks into place in this position.
4. Figure D: turn the rim of the blade as-
sembly4 in a clockwise direction until
the arrow symbol shows to the opened
lock13 and pull it up and off the mo-
tor unit1.
5. Clean the blade assembly with warm
water and a little detergent.
6. Let the blade assembly dry completely.
7. Place the blade assembly
4
on the motor
unit
1
. The arrow symbol shows to the
opened lock
13
.
8. Turn the blade assembly until the arrow
symbol shows to the closed lock. The
blade assembly is now correctly mount-
ed again.
BB&3(B%ERRN6HLWH)UHLWDJ1RYHPEHU
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSM 250 B1 - IAN 273031 Smoothie-mixer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSM 250 B1 - IAN 273031 Smoothie-mixer in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info