646943
9
Zoom out
Zoom in
Previous page
1/74
Next page
7
GB
Preparing food
WARNING!
Risk of material
damage
!
Thick or firm peels, (e.g. of citrus fruits, pine-
apple), stems and pips of stone fruits (e.g.
cherries, peaches, apricots) must be removed
before blending.
Rinse or wash the fruits.
Cut the fruit into rough pieces (approx.
3-4 cm edge length).
Please use a sufficient amount of liquid
(mineral water, fruit juice, milk, yoghurt).
We recommend a mixing ratio of 1:1.
Blending
CAUTION: depending on the hardness
and consistency of the ingredients in the
blender jug6, do not fill it to the maximum;
otherwise the blade assembly4 could be-
come clogged.
NOTES:
If the smoothie is too thick, add a little
mineral water, fruit juice, milk or yo-
ghurt to suit your taste.
You may achieve a more even consisten-
cy for the smoothie (e. g. when using
harder fruits), if you repeatedly interrupt
and restart the blending process (pulse
function: release and then press the mix
button
2
again).
If there are still bit of food (e.g. fruit
cores) on the sealing ring14, wipe it
down with kitchen roll in order to ensure
its sealing function.
1. Place the fruit pieces and other ingredi-
ents into the blender jug6 as desired.
2. Figure C: stick the blender jug into the
preassembled blade assembly4 from
the bottom. The marking9 points to-
wards the opened lock5. The locking
blades10 on the blender jug engage
into the recess at the blade insert.
3. Turn the blender jug as far as it will go in
a clockwise direction, until the marking
9
points to the closed lock
5
.
4. Connect the mains plug7 with the wall
socket.
5. Figure A: pivot the blender jug with
the motor unit1 into its maximum up-
ward position.
6. Press and hold the mix button
2
. The
blending process is started.
7. Release
the mix button
2
after approx.
10 - 20 seconds. The blending process
is thereby completed.
8. Figure B: pivot the blender jug with
the motor unit into its fully downwards
position.
9. Wait until the drink has collected in the
blender jug6 .
10. Turn the blender jug anti-clockwise until
the marking9 points to the opened
lock5.
11. Pull the blender jug downwards to re-
lease it from the blade assembly4. To
remove the large blender jug, first pivot
the motor unit slightly upwards.
12. If there are still rather large pieces of
fruit in the smoothie, repeat the blend-
ing process for a few seconds.
13. If necessary, close the blender jug with
the lid11.
14. Clean the device with the cleaning
jug8 as soon as possible after use.
15. Disconnect the mains plug7 from the
wall socket.
Crushing ice
Place a maximum of 50 g of ice cubes
per process into the blender jug.
To crush ice, you should briefly interrupt
and restart the blending process several
times (pulse function: release blender
button2 and press it again)
BB&3(B%ERRN6HLWH)UHLWDJ1RYHPEHU
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSM 250 B1 - IAN 273031 Smoothie-mixer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSM 250 B1 - IAN 273031 Smoothie-mixer in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info