659608

Silvercrest SSKE 300 A1 - IAN 114277 Manual

16
Zoom out
Zoom in
Previous page
1/129
Next page
SilverCrest SSKE 300 A1
14 - English
Use
Filling the blender jug
1. Remove the lid (2) and measuring cap (1) from the blender jug (3). To do so, rotate the lid (2)
slightly anti-clockwise until the arrow on the handle (4) is aligned with the open lock symbol.
2. Add the desired ingredients to the blender jug (3). Note the minimum and maximum fill level for each
food type you wish to prepare. See the scale (5).
3. Place the lid (2) back on the blender jug (3). To do so, the lid (2) must first be rotated so that the
open lock symbol is aligned with the arrow on the handle (4). Press the lid (2) onto the blender jug
(3) and rotate the lid (2) clockwise until the closed lock symbol is aligned with the arrow on the
handle (4).
4. Place the measuring cap (1) in the opening of the lid (2) and lock the measuring cap (1) into
position. To do this, turn it in a clockwise direction.
Attaching the blender jug to the motor unit
1. If the mains plug is connected to the wall outlet, remove it from the wall outlet.
2. Place the blender jug (3) on the motor unit (6) and press the blender jug (3) down until you hear a
beep.
Warning!
Make sure the power cable is not in your working area. Otherwise you could pull it
inadvertently and knock the soupmaker over.
Switching on / selecting function
The soupmaker can only be switched on once the blender jug (3) is properly locked into
position and correctly seated on the motor unit (6).
1. Fill the blender jug (3) as described in the "Filling the blender jug" section and place it on the motor
unit (6).
2. Connect the power cable (9) plug to a live wall outlet. You will then hear a beep.
3. Press the ON/OFF button (16) on the control panel (7). You will then hear a beep, the ON/OFF
button (16) LED will light up and the LEDs for the other control panel (7) buttons will flash.
4. Press the button on the control panel (7) that corresponds with the desired function for preparing the
ingredients.
5. The LED for the selected function will then flash and all of the other LEDs will go out.
… 16 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sske-300-a1---ian-114277

Reset search

  • Bonsoir,
    bip et ne démarre plus avec les trois voyants du haut en clignotants? merci Submitted on 1-2-2020 at 20:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSKE 300 A1 - IAN 114277 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSKE 300 A1 - IAN 114277 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info