659608
15
Zoom out
Zoom in
Previous page
1/129
Next page
SilverCrest SSKE 300 A1
English - 13
Getting started
The blender jug (3) should be cleaned before first use. For more on this, please refer to the
"Maintenance/cleaning" section on page 20. Before use, ensure that all parts are completely dry.
Assembling and setting up the soupmaker
Warning!
Only use the appliance in dry, enclosed spaces. Never use it outdoors.
Place the soupmaker on an even, stable and heat-resistant surface only. If the soupmaker
is not placed on an even surface the movement of the boiling contents could make it tip
over, possibly causing damage to property and burns.
Maintain a clearance of at least 50 cm around the appliance. This will help prevent
damage caused by escaping steam.
Risk of fire!
Do not place the appliance on textile surfaces such as a tablecloth.
Do not place the appliance on metal surfaces. These may become very hot and cause a
fire.
Do not place the appliance under or directly next to flammable objects, e.g. curtains or
blinds.
1. Place the motor unit (6) on an even, non-slip and dry surface. Do not connect the power cable (9)
plug to the wall outlet yet!
2. Insert the measuring cap (1) into the lid (2). Align it so that the plastic tabs on the measuring cap (1)
fit into the notches on the lid (2). Then rotate the measuring cap (1) clockwise to lock it into place.
3. If required, insert the strainer (C) or the egg basket (D) into the blender jug (3). The strainer (C) is
locked into place when the lid (2) is closed. The egg basket (D) must be pushed into the blender jug
(3) until it locks into place.
4. Place the lid (2) on the blender jug (3). To do so, the lid (2) must first be rotated so that the open
lock symbol is aligned with the arrow on the handle (4). Press the lid (2) onto the blender jug (3)
and rotate the lid (2) clockwise until the closed lock symbol is aligned with the arrow on the handle
(4). This will lock the lid (2) in place and prevent it from being inadvertently loosened during
cooking.
5. Place the blender jug (3) onto the motor unit (6). To do so, align the blender jug (3) so that the
contacts on the blender jug (3) can be pushed into the socket on the motor unit (6).
The soupmaker can only be switched on once the blender jug (3) is properly locked into
position and correctly seated on the motor unit (6).
15


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sske-300-a1---ian-114277

Reset search

  • Bonsoir,
    bip et ne démarre plus avec les trois voyants du haut en clignotants? merci Submitted on 1-2-2020 at 20:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSKE 300 A1 - IAN 114277 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSKE 300 A1 - IAN 114277 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info