Manual Silvercrest SSB 36 B2 - IAN 274307 Soundbar (page 39 of 46) (English, German, Dutch, French)

649871

Zoom out

Zoom in

1/46

Adjusting the tone quality

The tone quality can only be changed in the mode “Music”.

The settings are not stored when you change into a differ-

ent mode

• Press one of the buttons19 to select the presets for the

tone quality for music (MUSIC), films (MOVIE) or dia-

logue (DIALOG).

• Only in the mode “Music”: use the TREBLE –/+

buttons26 to adjust the treble sounds.

If MOVIE or DIALOG is activated, an automatic

change to MUSIC takes place.

• Only in the mode “Music”: use the BASS –/+22

buttons to adjust the bass sounds.

If MOVIE or DIALOG is activated, an automatic

change to MUSIC takes place.

6.3 HDMI (ARC) connection

Definition

- HDMI stands for High Definition Multimedia Interface.

Via this transmission route, digital images and audio

signals can be transmitted.

- HDMI (ARC - Audio Return Channel) means that the

cable is provided with an ARC channel. Via this chan-

nel, audio signals are transmitted in both directions.

The following modern devices are usually provided with an

ARC output: television sets, games consoles or digital re-

ceivers. In the following, the connection to a television set

is described.

Via the ARC channel of the HDMI cable, digital audio sig-

nals can be transmitted from the source device (e.g. televi-

sion set) to the soundbar.

The audio transmission via the HDMI (ARC) socket8 can

only work if all components are ARC-enabled. If the trans-

mission is unsuccessful, you must take one or possibly sev-

eral of the following items into account:

• The old HDMI cable must be replaced with a new

ARC-enabled cable.

• Not every HDMI socket on the television set needs to

support ARC. In this case, the HDMI cable on the tele-

vision set must be connected to another ARC-enabled

HDMI socket. Usually, the respective HDMI sockets are

labelled with ARC. If not, refer to the user instructions

of your television set.

• For several television sets, the digital audio output must

be activated. Select the audio output PCM 2.0 (PCM

stereo).

1. Connect the socket HDMI (ARC)8 by means of an

ARC-enabled HDMI cable to an HDMI ARC socket of

your television set.

2. Switch on the soundbar with the POWER but-

ton28.

3. By pressing the HDMI (ARC) button17, select the

HDMI input.

4. Switch on the television set. When the connection is es-

tablished for the first time, it may take several seconds

until sound is output from the soundbar.

6.4 Bluetooth

Establishing connection

NOTES:

• The identification of the device is “SSB36B2”.

• After it has been switched over to Bluetooth, the device

automatically attempts to establish a connection with

the last paired device.

• Please observe that the establishment process of the

connection may vary slightly depending on the device

and the software used.

1. Press the button15 to switch over to a Bluetooth

connection. LED1 flashes blue.

2. Switch on the audio device (e.g. smartphone) and start

the Bluetooth connection.

3. The audio device will now receive the device identifi-

cation “SSB36B2”. If nothing happens, press the but-

ton PAIR5 on the device or the button15 on the

remote control for approximately 1 second. The blue

LED1 flashes rapidly.

4. Establish the connection with the soundbar on the au-

dio device. If you are asked for a password, enter

“0000”. Both devices are now interconnected. LED1

now lights up in blue and a beep is heard.

NOTE: usually, audio devices remember the identification

of the device. In this case, it may not be necessary to es-

tablish the connection manually again if the Bluetooth func-

tion is activated.

5. Now play a song on the audio device. The sound is

played back from the soundbar.

6. With the I

WW25, XXI21 and X/II24 buttons you

can select and control the music tracks.

Interruption of the connection

The connection is interrupted if

…one of the devices is switched off;

…the Bluetooth function is switched off;

…the range (approx. 10 metres) is exceeded;

…you press the buttons15 or PAIR5 until the blue

LED is flashing. In this case, a new connection to an-

other device can be established immediately.

BB58B6RXQGEDUB%ERRN6HLWH)UHLWDJ$SULO

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSB 36 B2 - IAN 274307 Soundbar in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SSB 36 B2 - IAN 274307 Soundbar Manual

Product: